IMI Norgren 100601000 Pneufit 10 mm Tee Connector
The IMI Norgren 100601000 is a 10 mm Pneufit tee connector for a metric tube branch. Verify tubing outside diameter and available installation clearance.
Description
IMI Norgren 100601000 is the 10 mm metric-tube entry in the Pneufit 10060 tee connector table. Its three tube connections form a compact branch point.
100601000 Configuration
| Part code | 100601000 |
|---|---|
| Connector type | Metric tube tee |
| Tube outside diameter | 10 mm |
| Main envelope C | 52 mm |
| Branch envelope E | 26 mm |
Selection Notes
Match all connected tubing to 10 mm outside diameter. Check the 52 mm C dimension and 26 mm E dimension against the available installation space; the 10060 model is a tube tee, not a threaded adaptor.
Exact 100601000 Tee Dimensions
| Dimension | Metric value |
|---|---|
| Tube outside diameter (mm) | 10 |
| C (mm) | 52 |
| D (mm) | 26 |
| E (mm) | 26 |
| K diameter (mm) | 16.5 |
| T (mm) | 20.2 |
| AF spanner size (mm) | 13 |
| Weight (g) | 43 |
Pneufit 10 Series Operating Conditions and Materials
| Parameter | Catalogue specification |
|---|---|
| Medium | Compressed air; consult the manufacturer for other media |
| Operating pressure | Vacuum 750 mmHg to 18 bar, dependent on tubing specification |
| Operating temperature | -20 to +80 degrees C |
| Tube materials | Nylon 11 or 12; polyurethane 95 durometer or above; LDPE |
| Body and collet | Nickel-plated brass |
| O-ring | VMQ-free NBR |
Metric Tube and Layout Check
The 100601000 row is the 10 mm tube entry in the 10060 tee connector table. Dimensions in this listing are the metric values shown in parentheses in the original mixed-unit drawing. Check the C dimension of 52 mm and E dimension of 26 mm against the installation layout.
Tube-Dependent Service Limits
The series pressure limit depends on the operating specification of the selected tubing. The catalogue specifies compressed air and instructs users to consult the manufacturer for other media. Its assembly diagram requires a square, burr-free tube end and full insertion past the O-ring to the tube stop.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Model | 100601000 |
|---|---|
| Tube outside diameter | 10 mm |
| Connector type | Tee connector |







