Norgren 2636265 26360 G1/4 Bistable 5/2 Valve Body
2636265: G1/4 double operator 5/2 valve body with 1200 l/min flow and a 1-10 bar operating range.
Description
The 2636265 uses an indirectly operated soft seal T-spool with an operator at each end for bistable control of double acting pneumatic actuators. Detented manual overrides provide local actuation during commissioning.
Selection Notes for 2636265
Select two compatible solenoids and the required electrical accessories. Provide space at both ends of the valve for the operators, and check the actuator behavior if control signals or supply pressure are lost.
Valve function and performance
| Parameter | Value |
|---|---|
| Function | 5/2 bistable |
| Operation | Indirect solenoid / solenoid T-spool |
| Port size | G1/4 |
| Operating pressure | 1-10 bar |
| Flow | 1200 l/min |
| Switching time | 30 ms |
| Manual override | With detent |
| Weight without solenoids | 0.9 kg |
Construction and service conditions
| Parameter | Value |
|---|---|
| Medium | Filtered compressed air, lubricated or nonlubricated |
| Housing | Anodized aluminium |
| Pilot flange | POM plastic |
| Seals | NBR |
| Ambient and media temperature | -10 to +60 C, subject to selected solenoid |
| Flow direction | Fixed |
| Mounting | Any orientation; solenoid on top preferred |
Standard installation dimensions
| Parameter | Value |
|---|---|
| Standard assembly height with operators | 224 mm |
| Body width | 55 mm |
| Body depth | 35 mm |
| Mounting hole spacing | 40 mm |
| Supply and exhaust port center spacing | 24 mm |
Bistable actuator control
Two solenoid operators shift the 5/2 spool in opposite directions. The minimum supply pressure is 1 bar and maximum pressure is 10 bar. The 1200 l/min flow and 30 ms switching time support double acting actuator circuits; confirm the desired response to loss of electrical and pneumatic supplies during system design.
Air and temperature requirements
The soft seal design uses an anodized aluminium housing, POM pilot flange and NBR seals with filtered compressed air. Lubricated or nonlubricated air can be used. Ambient and media temperatures are -10 to +60 C subject to the selected solenoids; below +2 C the air must be sufficiently dry to prevent ice.
Mounting clearance
The standard arrangement occupies 224 mm from end to end with operators fitted. Provide access to both manual overrides and both coil retainers, and allow connector clearance beyond the valve body. The body is 55 mm wide with 40 mm mounting hole spacing.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Model | 2636265 |
|---|---|
| Function | 5/2 bistable |
| Port size | G1/4 |
| Operating pressure | 1-10 bar |
| Manual override | With detent |
| Supply scope | Valve body without solenoid coils |








