IMI Norgren 11-018-100 1/4 PTF Precision Air Pressure Regulator

IMI Norgren 11-018-100 is a low-pressure precision regulator with a 0.1 to 4.1 bar adjustment range and constant-bleed response.

Request a Quote

SKU: 11-018-100 Category: Tags: , Brand:

Description

The 11-018-100 is the low-pressure member identified in the supplied 11-018 ordering table. Its handwheel, relief function and continuous pilot bleed suit pressure-setting duties where small flow changes matter.

Request a Quote

Selection Notes for 11-018-100

Provide 5-micron prefiltration and oil-free air, then check that the supply remains at least 0.5 bar above the adjusted outlet pressure. The folder calls the port G1/4, but the matching manufacturer sheet specifies 1/4 PTF; confirm the mating thread before ordering.

Verification Notes

  • The folder G1/4 description conflicts with the exact-row PDF statement PTF; do not relabel this as verified G-thread.

11-018-100 Low-Pressure Selection Data

Parameter Value
Adjustment range 1 to 60 psig (0.1 to 4.1 bar)
Inlet range, low-pressure models 8 to 150 psig (0.55 to 10.3 bar)
Required supply margin At least 7 psig (0.5 bar) above adjusted outlet
Flow repeatability 0.02 psig (0.001 bar)
Supply off/on repeatability 0.05 psig (0.004 bar)

11-018 Panel Mounting Reference

Installation detail Dimension
Panel mounting hole 12 mm diameter
Maximum panel thickness 2.4 mm
Body width / depth 54 mm / 54 mm

Constant Bleed and Residual Pressure

A small pilot-air bleed escapes through the bottom relief passage under dead-end conditions. The catalogue notes a residual outlet pressure of 2.5 to 10 millibar, so do not describe this regulator as a zero-residual shutoff device.

Low-Pressure Service Kit

The low-pressure 11-018 versions use catalogue service kit 2787-01. A pressure gauge is not included with the listed ordering configuration.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

11-018-100

Function

Precision air pressure regulator

Main port

1/4 PTF per supplied manufacturer sheet

Outlet range

0.1 to 4.1 bar (1 to 60 psig)

Adjustment

Handwheel

Gauge port

1/4 PTF