IMI Norgren 11400-2G-PE103 Conventional Pilot Pressure Regulator

IMI Norgren 11400-2G-PE103 is a conventional pilot regulator marked 0.06 to 4 bar; keep the PE103 suffix when matching a replacement.

Request a Quote

SKU: 11400-2G-PE103 Category: Tags: , Brand:

Description

The PE103 package and body both provide the full ordering identity for this hand-adjusted pilot unit. Although its visible pressure band matches PE100, the available documents do not explain the construction difference between the suffixes.

Request a Quote

Identifying 11400-2G-PE103

Brand Norgren
Part number 11400-2G-PE103
Function Conventional pilot pressure regulator
Outlet range 0.06 to 4 bar; photographed body marking
Adjustment Manual handwheel
Main port G1/4 stated in folder; exact thread requires confirmation

Selection Notes for 11400-2G-PE103

Do not replace PE103 with PE100 merely because the setpoint range is similar. Compare the actual thread, mounting, required accessories and equipment record; exact PE103 performance curves are not supplied.

Verification Notes

  • Exact PE103 absent in PDF; AE103 is a separate code. No verified explanation of PE100 versus PE103 suffix differences is available.

Product Series Reference – Exact Model Not Verified

The following PDF information describes the 11-400 conventional pilot regulators; supplied PTF catalogue lists AC103/AE103/AG103 versions, not the exact PC/PE/PG code product series. The source document does not confirm the exact product SKU on this page. Series specifications, configuration examples, and options are reference information, not verified specifications or supplied contents of this individual product. Confirm the exact model and configuration before ordering.

11-400 Series Reference – Published Curve Coverage

Curve group Conditions shown Applicability limit
Lower-range flow chart 1/4-inch port, 100 psig inlet, 1-30 psig range Not an exact PE103 curve
Higher-range flow chart 1/4-inch port, 100 psig inlet, 2-100 psig range Not an exact PE103 curve
Regulating charts 150 psig inlet; curves at 50 percent of recommended flow Family examples; do not claim a measured PE103 result

No Exact 0.06 to 4 bar Curve

The supplied performance page illustrates other range groups. It does not provide a confirmed PE103 flow or regulation trace, so the source body range must not be expanded into a claimed flow guarantee.

Gauge and Bracket Are Optional in the Drawing

The mounting illustration is expressly shown with optional gauge and mounting bracket. Their presence in a family drawing does not mean either accessory is included with the PE103 unit in the source photos.

Maintenance Inspection

Before replacing 11400-2G-PE103, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

11400-2G-PE103

Function

Conventional pilot pressure regulator

Outlet range

0.06 to 4 bar; photographed body marking

Adjustment

Manual handwheel

Main port

G1/4 stated in folder; exact thread requires confirmation