IMI Norgren 0880323 18D G1/4 Water-Application Pressure Switch 0.5 to 8 bar

IMI Norgren 0880323 is an 18D G1/4 pressure switch with a 0.5 to 8 bar setpoint range. The verified catalogue lists FPM sealing and DIN EN 175301-803 form A; water-application version.

Request a Quote

SKU: 0880323 Category: Tags: , Brand:

Description

The verified 18D catalogue includes an exact 0880323 row. Its interface, pressure band and connection must be considered together when selecting this version.

Request a Quote

0880323 Configuration

Model 0880323
Pressure connection G1/4
Setpoint range 0.5 to 8 bar
Catalogue seal FPM
Electrical connection DIN EN 175301-803 form A; water-application version

Selection Notes for 0880323

Use the water-application row only when the process medium and seal are suitable. Confirm the product marking, G1/4 thread and connector on the actual unit.

Verified 0880323 Catalogue Selection

Parameter Value
Model 0880323
Pressure connection G1/4
Setpoint range 0.5 to 8 bar
Typical switching difference at lower range 0.35 bar
Typical switching difference at upper range 0.85 bar
Catalogue seal FPM
Electrical connection DIN EN 175301-803 form A; water-application version
Drawing number 2
Pressure-sensor body Brass

Applicable 18D Media and Environmental Data

Parameter Catalogue value
Medium Neutral, non-combustible gaseous and liquid fluids; special water versions are separately listed
Sensing operation Diaphragm
Maximum media viscosity 1000 mm^2/s
Ambient/media temperature 0 to +80 degrees C (FPM)
Degree of protection IP65 for DIN form A connection

Model-Specific Catalogue Conditions

The water-application table explicitly lists 0880323 with a brass body and FPM seal. Match the actual medium and the exact part code.

Connection and Operating-Range Check

Setpoints should ideally be in the middle of the stated switching range. The maximum overpressure value must not be treated as the normal operating range.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Model

0880323

Pressure connection

G1/4

Setpoint range

0.5 to 8 bar

Catalogue seal

FPM

Electrical connection

DIN EN 175301-803 form A; water-application version