IMI Norgren T64T-2GB-P1N G1/4 Olympian Plus 3/2 Lockout Valve
T64T-2GB-P1N: G1/4 threaded-inlet-only Olympian Plus 64 lockout valve with a red 3/2 slide, 17 bar maximum pressure and 2.6 Cv inlet-to-outlet flow.
Description
Model T64T-2GB-P1N. This red-slide valve provides local shut-off and exhaust operation in an Olympian Plus 64 assembly. The B porting configuration has a threaded inlet only.
Selection Notes for T64T-2GB-P1N
Match the G1/4 inlet, yoke interface and exhaust arrangement; do not substitute a threaded-outlet configuration.
Valve Configuration
| Parameter | Value |
|---|---|
| Function | 3-port, 2-position |
| Actuator | Red slide |
| Threaded connection | G1/4 inlet |
| Porting configuration | Threaded inlet only; plug-in yoke connection |
| Exhaust connection | 1/8 ISO Rc |
| Range | Olympian Plus 64 |
Operating Conditions and Flow
| Parameter | Value |
|---|---|
| Fluid | Compressed air and neutral gases |
| Maximum pressure | 17 bar (250 psig) |
| Operating temperature | -20 to 80 degrees C |
| Inlet-to-outlet flow coefficient Cv | 2.6 |
| Low-temperature condition | Air must be dry enough to avoid ice below 2 degrees C |
Construction and Service
| Parameter | Value |
|---|---|
| Body | Zinc |
| Slide | Acetal plastic |
| Elastomers | Nitrile |
| Service kit | 4384-210 for T64T red-slide type |
| Service kit contents | Seals and slide; separate service item |
Isolation and Exhaust Function
The T64T-2GB-P1N uses a red slide to operate a three-port, two-position shut-off function. This configuration has a G1/4 threaded inlet and a plug-in yoke connection rather than two threaded main ports. The exhaust connection is 1/8 ISO Rc.
Olympian Plus Mounting
The plug-in design attaches to a compatible Olympian Plus yoke and can be positioned upstream or downstream of the air preparation units. Check the yoke connection and available exhaust route when selecting the valve for an existing assembly.
Air Supply and Servicing
The valve accepts compressed air or neutral gases up to 17 bar. Its zinc body uses an acetal slide and nitrile elastomers. Keep the air supply sufficiently dry to avoid ice at low temperature. Service kit 4384-210 is a separate seals-and-slide item for the red-slide T64T type.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Model | T64T-2GB-P1N |
|---|---|
| Threaded inlet | G1/4 |
| Porting | Threaded inlet only |
| Function | 3/2 |
| Actuator | Red slide |
| Maximum pressure | 17 bar |







