Norgren 34D-P016G-DA1-AA 34D G1/4 IO-Link Pressure Sensor
34D-P016G-DA1-AA: 0-16 bar electronic pressure sensor with one PNP output, one analog output, configurable IO-Link and a four digit display.
Description
The 34D-P016G-DA1-AA combines local pressure indication with programmable switching and analog output for pneumatic, hydraulic and compatible process fluid systems. Its upper body rotates through 345 degrees relative to the process connection to align the display after installation.
Selection Notes for 34D-P016G-DA1-AA
Use the G1/4 process connection with media compatible with 316L stainless steel, alumina ceramic and FKM. Check 18-30 V DC supply, output requirements and the M12 pin assignment before connection.
Exact measuring and output configuration
| Parameter | Value |
|---|---|
| Pressure range | 0-16 bar (0-232 psi) |
| Pressure type | Relative pressure |
| Process connection | G1/4 |
| Output configuration | 1 PNP and 1 analog |
| Communication | IO-Link configurable |
| Maximum test pressure | 85 bar; not an operating pressure |
| Connector | M12 x 1 |
Electrical and environmental conditions
| Parameter | Value |
|---|---|
| Supply | 18-30 V DC; reverse polarity protected |
| Current consumption | Less than 35 mA |
| Permissible residual ripple | 10% within supply limits |
| Switching time | Less than 3 ms |
| Ambient and media temperature | -25 to +80 C |
| Protection | IP67 with plug mounted |
| Total accuracy | +/-0.5% of full scale, excluding temperature sensitivity |
| Linearity | +/-0.25% plus 1 display step |
| Weight | 0.26 kg |
Installation dimensions
| Parameter | Value |
|---|---|
| Overall height | 90.7 mm |
| Body width | 34 mm |
| Side envelope | 49.4 mm |
| Process connection | G1/4 female |
| Connection wrench size | 30 mm |
| Electrical connector | M12 x 1 |
Programmable pressure monitoring
Switching and reset points are adjustable over 0 to 100% of full scale, with a minimum difference of 0.5% of full scale. Hysteresis or window operation can be selected for each output, and normally open or normally closed switching logic is programmable. On and off delays are adjustable from 0 to 50 seconds.
Display and media compatibility
The four digit alphanumeric display supports bar, psi and MPa units with programmable red or green indication at the setpoint. Wetted parts are 316L stainless steel, alumina ceramic and FKM. The upper body can rotate 345 degrees to improve visibility without disturbing the process connection.
Installation envelope
The pressure sensor is 90.7 mm high and 34 mm wide, with a 49.4 mm side envelope to the M12 connection. The G1/4 process connection uses a 30 mm wrench size. Maintain access for the mating plug, seal the process interface correctly and install the plug before relying on IP67 protection.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | 34D-P016G-DA1-AA |
|---|---|
| Measuring range | 0-16 bar |
| Process connection | G1/4 |
| Output | 1 PNP and 1 analog; IO-Link configurable |
| Supply voltage | 18-30 V DC |
| Protection | IP67 with plug mounted |







