IMI Norgren R07-200-RGEA 1/4 PTF 0.3 to 3.5 bar Relieving Miniature Pressure Regulator
R07-200-RGEA is a miniature relieving pressure regulator with 1/4 PTF ports and an outlet adjustment range of 0.3 to 3.5 bar.
Description
The R07-200-RGEA combines a zinc body with a push-to-lock pressure-adjusting knob. Its relieving diaphragm permits a lower outlet setting even when the downstream circuit is dead-ended. A pressure gauge is included in this configuration.
Exact pneumatic configuration
| Parameter | Specification |
|---|---|
| Inlet and outlet connection | 1/4 PTF |
| Outlet adjustment range | 0.3 to 3.5 bar |
| Diaphragm | Relieving |
| Pressure gauge | Included |
| Pressure adjustment | Snap-action knob; push in to lock |
| Medium | Compressed air and neutral gases |
Operating limits and construction
| Parameter | Specification |
|---|---|
| Maximum inlet pressure | 20 bar (300 psig) |
| Operating temperature | -35 to +65 C |
| Cold operation | Air must be sufficiently dry to prevent ice below +2 C |
| Body | Zinc |
| Bonnet, knob and valve seat | Acetal |
| Elastomers | Nitrile |
| Valve | Brass and nitrile |
Panel installation and service
| Parameter | Specification |
|---|---|
| Panel mounting hole diameter | 30 mm |
| Maximum panel thickness | 6 mm |
| Body width reference | 41 mm |
| Knob diameter reference | 28 mm |
| Service kit | 3407-02 |
| Service kit contents | Slip ring, diaphragm, valve seat with O-ring, valve and valve spring |
Selection for R07-200-RGEA
Use 1/4 PTF mating connections and keep the controlled outlet within 0.3 to 3.5 bar. The maximum inlet pressure is 20 bar; the outlet setting range is a separate limit.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | R07-200-RGEA |
|---|---|
| Port size | 1/4 |
| Thread | PTF |
| Outlet pressure range | 0.3 to 3.5 bar |
| Regulation | Relieving |
| Gauge | Included |
| Maximum inlet pressure | 20 bar |
| Medium | Compressed air and neutral gases |









