IMI Norgren B74G-4AT-AD3-RSN 1/2PTF Filter Regulator
B74G-4AT-AD3-RSN: 1/2 PTF, T-bar adjustment, automatic drain, 40 micron, metal level bowl, relieving outlet 0.7-17 bar, inlet max 17 bar, up to 80 C. Confirm the full code, interface and operating limits before replacement.
Description
IMI Norgren B74G-4AT-AD3-RSN 1/2PTF Filter Regulator is a Norgren filter regulator. Its verified configuration is 1/2 PTF, T-bar adjustment, automatic drain, 40 micron, metal level bowl, relieving outlet 0.7-17 bar, inlet max 17 bar, up to 80 C. Match the complete code and connection with the installed equipment before ordering.
Confirm the complete model code B74G-4AT-AD3-RSN against the component marking and circuit requirements.
Record the full model marking and check the mating interface, available space and operating conditions during maintenance. Follow the machine manufacturer’s isolation and commissioning procedure before returning the circuit to service.
Model-specific verified configuration
| Specification | Value |
|---|---|
| Complete model code | B74G-4AT-AD3-RSN |
| Operating limits | 1/2 PTF, T-bar adjustment, automatic drain, 40 micron, metal level bowl, relieving outlet 0.7-17 bar, inlet max 17 bar, up to 80 C |
Port, drain and bowl selection
Confirm the complete model code B74G-4AT-AD3-RSN against the component marking and circuit requirements.
Inlet versus outlet limit
The operating limits for B74G-4AT-AD3-RSN are 1/2 PTF, T-bar adjustment, automatic drain, 40 micron, metal level bowl, relieving outlet 0.7-17 bar, inlet max 17 bar, up to 80 C. Apply the published values only to this complete configuration and confirm the actual supply, temperature and medium at the point of use.
Service and setup checks
Before ordering B74G-4AT-AD3-RSN, compare the exact marking, connection and physical option shown with the installed equipment. A shared series or similar appearance does not confirm compatibility.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | B74G-4AT-AD3-RSN |
|---|---|
| Operating limits | 1/2 PTF, T-bar adjustment, automatic drain, 40 micron, metal level bowl, relieving outlet 0.7-17 bar, inlet max 17 bar, up to 80 C |








