IMI Norgren 20AG-X4G-PH100 G1/2 0-8 bar High Flow Pressure Regulator
Norgren 20AG-X4G-PH100 is a G1/2 high-flow pressure regulator with a 0-8 bar outlet range and relieving diaphragm.
Description
The 20AG-X4G-PH100 is a G1/2 high-flow regulator with a 0-8 bar outlet range. It belongs to the 20AG family, whose ported regulators are intended for general-purpose pneumatic circuits that need stable outlet pressure as flow demand changes.
Key Features
- 0-8 bar outlet range for general pneumatic circuits
- G1/2 port as described for this item
- Large diaphragm and balanced valve in the 20AG series
- T-bar adjustment with relieving diaphragm
- Maximum inlet pressure 28 bar in the series
Technical Data
| Model | 20AG-X4G-PH100 |
|---|---|
| Port | G1/2 |
| Outlet range | 0-8 bar |
| Max inlet | 28 bar (406 psi) |
| Gauge port | 1/8 in ISO Rc |
| Body | Zinc alloy (series) |
| Temperature | -34 to 80 C (dry air) |
Selection Notes
The 20AG ordering table in The series lists 3/4 in and 1 in models, so the G1/2 0-8 bar combination is taken from the item description. Confirm the spring range and port thread on the regulator before installation.
20AG series – ordering information (series models)
| Port size | Model number | Typical flow scfm (dm3/s) | Weight lb (kg) |
|---|---|---|---|
| 3/4 in PTF | 20AG-X6G-AH100 | 160 (80) | 6.3 (2.85) |
| G3/4 | 20AG-X6G-PH100 | 160 (80) | 6.3 (2.85) |
| 1 in PTF | 20AG-X8G-AH100 | 200 (100) | 6.4 (2.90) |
| G1 | 20AG-X8G-PH100 | 200 (100) | 6.4 (2.90) |
Flow capacity in the series
The ordering table gives typical flows of 160 scfm for the 3/4 in models and 200 scfm for the 1 in models, measured with 100 psig inlet, 60 psig set pressure and 15 psig droop. These figures describe the series models listed and should not be read as a guaranteed flow for the G1/2 variant.
Inlet pressure and materials
The 20AG body is zinc alloy with an aluminium bonnet and a 1/8 in ISO Rc gauge port. Maximum inlet pressure is 28 bar, and the air supply must be dry enough to avoid ice formation below 2 C. Confirm that the site inlet pressure stays within these limits before commissioning.
Full Model Verification
Use the full model code when confirming IMI Norgren 20AG-X4G-PH100 G1/2 0-8 bar High Flow Pressure Regulator. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available series information, equipment records, and installation details to identify the exact version required.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | 20AG-X4G-PH100 |
|---|---|
| Port | G1/2 |
| Outlet range | 0-8 bar |
| Max inlet | 28 bar (406 psi) |
| Gauge port | 1/8 in ISO Rc |
| Body | Zinc alloy (series) |









