FESTO DHPS-10-A-NC 1254042 Parallel Gripper

The Festo DHPS-10-A-NC (part number 1254042) is a parallel gripper. Its product datasheet lists size as 10 and stroke per gripper jaws as 3 mm.

SKU: 1254042 Category: Tags: , , Brand:

Description

FESTO DHPS-10-A-NC 1254042 Parallel Gripper

The Festo DHPS-10-A-NC (part number 1254042) is a parallel gripper. Its product datasheet lists size as 10 and stroke per gripper jaws as 3 mm.

Key Features

  • Size: 10
  • Stroke per gripper jaws: 3 mm
  • Number of gripper jaws: 2
  • Mode of operation: Double-acting

Technical Data

Brand FESTO
Model DHPS-10-A-NC
Part number 1254042
Size 10
Stroke per gripper jaws 3 mm
Max. replacement accuracy ≤0.2 mm
Max. angular gripper jaw backlash ax, ay <0.5 deg
Max. gripper jaw backlash Sz <0.02 mm
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper <0.02 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Parallel
Gripper force back-up During closing
Design Lever
Force pilot operated motion sequence
Guide Plain-bearing guide
Position detection Via proximity switch
Operating pressure 0.4 MPa … 0.8 MPa
Operating pressure 4 bar … 8 bar
Operating pressure 58 psi … 116 psi
Max. operating frequency of gripper 4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 58 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 24 ms
Max. mass per external gripper finger 60 g
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Suitability for the production of Li-ion batteries Metals with more than 5% by mass of copper are excluded from use.
Exceptions are printed circuit boards, cables, electrical connectors and
coils.
Ambient temperature 5 °C … 60 °C
Mass moment of inertia 0.081 kgcm²
Max. force on gripper jaw Fz static 60 N
Max. torque at gripper Mx static 3 Nm
Max. torque at gripper My static 3 Nm
Max. torque at gripper Mz static 3 Nm
Lubrication interval for guide components 10 MioCyc
Product weight 68 g
Type of mounting Either:
Via female thread and centring sleeve
Via through-hole and centring sleeve
Pneumatic connection M3
Note on materials RoHS compliant
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy stainless steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DHPS-10-A-NC, part number 1254042, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists number of gripper jaws as 2 for part number 1254042. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Operating Conditions Check

Before selecting DHPS-10-A-NC, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DHPS-10-A-NC

Part Number

1254042

Size

10

Stroke per gripper jaws

3 mm

Max. replacement accuracy

≤0.2 mm

Max. angular gripper jaw backlash ax, ay

<0.5 deg

Max. gripper jaw backlash Sz

<0.02 mm

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

<0.02 mm

Number of gripper jaws

2