FESTO VPPM-8TA-L-1-F-0L6H-S1C1 572408 Proportional-Pressure Regulator
The Festo VPPM-8TA-L-1-F-0L6H-S1C1 (part number 572408) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and standard nominal flow rate (standardised to din 1343) as 1050 l/min.
Description
FESTO VPPM-8TA-L-1-F-0L6H-S1C1 572408 Proportional-Pressure Regulator
The Festo VPPM-8TA-L-1-F-0L6H-S1C1 (part number 572408) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and standard nominal flow rate (standardised to din 1343) as 1050 l/min.
Key Features
- Valve function: 3-way proportional pressure regulator
- Standard nominal flow rate (standardised to DIN 1343): 1050 l/min
- Pneumatic connection, port 1: Sub-base
- Pneumatic connection, port 2: Sub-base
Technical Data
| Brand | FESTO |
|---|---|
| Model | VPPM-8TA-L-1-F-0L6H-S1C1 |
| Part number | 572408 |
| Nominal size, supply | 8 mm |
| Nominal size, exhaust | 7 mm |
| Type of actuation | Electrical |
| Sealing principle | Soft |
| Mounting position | Any |
| Design | Piloted diaphragm regulator |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VPPM: if the power supply cable is interrupted, output pressure is maintained unregulated. |
| Reverse polarity protection | For all electrical connections |
| Type of reset | Mechanical spring |
| Type of piloting | Piloted |
| Valve function | 3-way proportional pressure regulator |
| Display type | Back-lit LCD |
| Pressure regulation range | 0.006 MPa … 0.6 MPa |
| Pressure regulation range | 0.06 bar … 6 bar |
| Inlet pressure 1 | 0 bar … 8 bar |
| Inlet pressure 1 | 0 MPa … 0.8 MPa |
| Max. pressure hysteresis | 0.03 bar |
| Standard nominal flow rate (standardised to DIN 1343) | 1050 l/min |
| Operational voltage range DC | 21.6 V … 26.4 V |
| Max. current consumption | 300 mA |
| Duty cycle | 100% |
| Max. electrical power consumption | 7 W |
| Residual ripple | 10% |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| KC mark | KC-EMV |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Media temperature | 10 °C … 50 °C |
| Degree of protection | IP65 |
| Ambient temperature | 0 °C … 50 °C |
| Product weight | 560 g |
| Linearity | 1 %FS |
| Hysteresis | 0.5 %FS |
| Reproducibility | 0.5 %FS |
| Total accuracy | 1.25 %FS |
| Temperature cooefficient | 0.04 %/K |
| Repetition accuracy FS | 0.5 % |
| Electrical connection | Via E-box |
| Type of mounting | Either: With through-hole With accessories |
| Pneumatic connection, port 1 | Sub-base |
| Pneumatic connection, port 2 | Sub-base |
| Pneumatic connection, port 3 | Sub-base |
| Note on materials | RoHS compliant |
| Material housing | Wrought aluminium alloy anodised |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VPPM-8TA-L-1-F-0L6H-S1C1, part number 572408, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic connection, port 1 as Sub-base for part number 572408. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | VPPM-8TA-L-1-F-0L6H-S1C1 |
| Part Number | 572408 |
| Nominal size, supply | 8 mm |
| Nominal size, exhaust | 7 mm |
| Type of actuation | Electrical |
| Sealing principle | Soft |
| Mounting position | Any |
| Design | Piloted diaphragm regulator |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VPPM: if the power supply cable is interrupted, output pressure is maintained unregulated. |









