FESTO ADVU-50-25-A-P-A 156639 Compact Cylinder
The FESTO ADVU-50-25-A-P-A, part number 156639, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO ADVU-50-25-A-P-A 156639 Compact Cylinder
The FESTO ADVU-50-25-A-P-A, part number 156639, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 25 mm.
- Piston diameter: 50 mm.
- Piston rod thread: M12x1.25.
Technical Data
| Brand | FESTO |
|---|---|
| Model | ADVU-50-25-A-P-A |
| Part number | 156639 |
| Product type | Compact Cylinder |
| Stroke | 25 mm |
| Piston diameter | 50 mm |
| Piston rod thread | M12x1.25 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Piston-rod end | Male thread |
| Design | Piston Piston rod |
| Position detection | Via proximity switch |
| Operating pressure | 0.08 MPa … 1 MPa |
| Operating pressure | 0.8 bar … 10 bar |
| Operating pressure | 11.6 psi … 145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 0.64 J |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 1057 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1178 N |
| Moving mass for 0 mm stroke | 112 g |
| Additional moving mass per 10 mm stroke | 16 g |
| Basic weight for 0 mm stroke | 560 g |
| Additional weight per 10 mm stroke | 72 g |
| Type of mounting | With through-hole With accessories |
| Pneumatic connection | G1/8 |
| Material collar screws | Galvanised steel |
| Material cover | Wrought aluminium alloy |
| Material dynamic seals | NBR TPE-U(PU) |
| Material piston rod | High-alloy steel |
| Material cylinder barrel | Wrought aluminium alloy |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model ADVU-50-25-A-P-A, part number 156639, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies ADVU-50-25-A-P-A as a compact cylinder under part number 156639. It lists stroke as 25 mm. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | ADVU-50-25-A-P-A |
| Part number | 156639 |
| Product type | Compact Cylinder |
| Stroke | 25 mm |
| Piston diameter | 50 mm |
| Piston rod thread | M12x1.25 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Piston-rod end | Male thread |
| Design | Piston Piston rod |





