FESTO DAPS-0015-090-R-F03 533417 Quarter Turn Actuator

The Festo DAPS-0015-090-R-F03 is a double-acting quarter-turn actuator with a 90° swivel angle. Its datasheet specifies an F03 flange pattern, 1 to 8.4 bar operating pressure and G1/8 pneumatic connection.

SKU: 533417 Category: Tags: , , Brand:

Description

FESTO DAPS-0015-090-R-F03 533417 Quarter Turn Actuator

The Festo DAPS-0015-090-R-F03 is a double-acting quarter-turn actuator with a 90° swivel angle. Its datasheet specifies an F03 flange pattern, 1 to 8.4 bar operating pressure and G1/8 pneumatic connection.

Key Features

  • Double-acting 90° quarter-turn operation
  • F03 flange hole pattern
  • 1 to 8.4 bar operating pressure
  • G1/8 pneumatic connection

Technical Data

Brand FESTO
Model DAPS-0015-090-R-F03
Part number 533417
Size of valve actuator 0015
Flange hole pattern F03
Swivel angle 90 deg
End-position adjustment range at 0° -1 deg … 9 deg
Shaft connection depth 13.2 mm
Fitting connection conforms to standard ISO 5211
Cushioning No cushioning
Mounting position Any
Mode of operation Double-acting
Design Scotch yoke system
Position detection None
Closing direction Closes to the right
Symbol 00991265
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Operating pressure 0.1 MPa … 0.84 MPa
Operating pressure 1 bar … 8.4 bar
Nominal operating pressure 0.56 MPa
Nominal operating pressure 5.6 bar
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) 1 Hz
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 3 – high corrosion stress
Ambient temperature -20 °C … 80 °C
Torque at nominal operating pressure and 0° swivel angle 15 Nm
Torque at nominal operating pressure and 50° swivel angle 7.5 Nm
Torque at nominal operating pressure and 90° swivel angle 11.3 Nm
Note on torque The operating torque of the actuator must not be higher than the
maximum permissible torque listed in ISO 5211, with reference to the
size of the mounting flange and of the coupling.
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 0.56 l
Product weight 750 g
Shaft connection T11
Pneumatic connection G1/8
Note on materials RoHS compliant
Material cover Wrought aluminium alloy
Material seals Fluoro rubber
NBR
PUR
Material housing Wrought aluminium alloy
Material screws High-alloy steel
Material shaft High-alloy steel
Material number shaft 1,4305

Application Notes

Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.

Selection and Installation

Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DAPS-0015-090-R-F03, part number 533417, quantity, destination and clear photos of the original unit when available.

Torque and Flange Matching

At the nominal operating pressure, Festo lists torque values of 15 Nm at 0°, 7.5 Nm at 50° and 11.3 Nm at 90°. Confirm that the actuator torque and F03 flange arrangement suit the valve and coupling.

Delivery Inspection

Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.

Order Detail Confirmation

To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.

Additional information

Brand

FESTO

Model

DAPS-0015-090-R-F03

Part Number

533417

Size of valve actuator

0015

Flange hole pattern

F03

Swivel angle

90 deg

End-position adjustment range at 0°

-1 deg … 9 deg

Shaft connection depth

13.2 mm

Fitting connection conforms to standard

ISO 5211

Cushioning

No cushioning

Mounting position

Any