FESTO DFM-32-20-P-A-GF 170854 Guided Drive
The Festo DFM-32-20-P-A-GF is a double-acting guided drive with a 32 mm piston diameter and 20 mm stroke. It has a plain-bearing guide and a G1/8 pneumatic connection.
Description
FESTO DFM-32-20-P-A-GF 170854 Guided Drive
The Festo DFM-32-20-P-A-GF is a double-acting guided drive with a 32 mm piston diameter and 20 mm stroke. It has a plain-bearing guide and a G1/8 pneumatic connection.
Key Features
- 32 mm piston diameter and 20 mm stroke
- Double-acting guided drive
- Plain-bearing guide
- 1.5 to 10 bar operating pressure
Technical Data
| Brand | FESTO |
|---|---|
| Model | DFM-32-20-P-A-GF |
| Part number | 170854 |
| Distance from centre of gravity of load to yoke plate xs | 50 mm |
| Stroke | 20 mm |
| Piston diameter | 32 mm |
| Operating mode, drive unit | Yoke |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Guide | Plain-bearing guide |
| Design | Guidance |
| Position detection | Via proximity switch |
| Symbol | 00991737 |
| Operating pressure | 0.15 MPa … 1 MPa |
| Operating pressure | 1.5 bar … 10 bar |
| Max. speed | 0.8 m/s |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 6 according to ISO 14644-1 |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 0.4 J |
| Max. force Fy | 1227 N |
| Max. force Fy static | 1227 N |
| Max. force Fz | 1227 N |
| Max. force Fz static | 1227 N |
| Max. moment Mx | 47.84 Nm |
| Max. torque Mx static | 47.84 Nm |
| Max. moment My | 24.53 Nm |
| Max. torque My static | 24.53 Nm |
| Max. moment Mz | 24.53 Nm |
| Max. torque Mz static | 24.53 Nm |
| Max. permissible torque load Mx as a function of stroke | 10.66 Nm |
| Max. effective load dependent upon stroke at defined distance xs | 188 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 482 N |
| Moving mass | 1020 g |
| Product weight | 1793 g |
| alternative connections | See product drawing |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
Application Notes
Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.
Selection and Installation
Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.
Inquiry
For a quotation or replacement enquiry, provide model DFM-32-20-P-A-GF, part number 170854, quantity, destination and clear photos of the original unit when available.
Theoretical Force at 6 Bar
For this model, Festo lists theoretical force at 6 bar as 415 N on the return stroke and 482 N on the advance stroke. Review the actual load, guide and mounting arrangement before selection.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DFM-32-20-P-A-GF |
| Part Number | 170854 |
| Distance from centre of gravity of load to yoke plate xs | 50 mm |
| Stroke | 20 mm |
| Piston diameter | 32 mm |
| Operating mode, drive unit | Yoke |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Guide | Plain-bearing guide |
| Design | Guidance |









