FESTO DFM-16-20-P-A-GF 170833 Guided Drive

The FESTO DFM-16-20-P-A-GF, part number 170833, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DFM-16-20-P-A-GF Category: Tags: , , Brand:

Description

FESTO DFM-16-20-P-A-GF 170833 Guided Drive

The FESTO DFM-16-20-P-A-GF, part number 170833, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Distance from centre of gravity of load to yoke plate xs: 50 mm.
  • Stroke: 20 mm.
  • Piston diameter: 16 mm.

Technical Data

Brand FESTO
Model DFM-16-20-P-A-GF
Part number 170833
Product type Guided Drive
Distance from centre of gravity of load to yoke plate xs 50 mm
Stroke 20 mm
Piston diameter 16 mm
Operating mode, drive unit Yoke
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Guide Plain-bearing guide
Design Guidance
Position detection Via proximity switch
Operating pressure 0.2 MPa … 1 MPa
Operating pressure 2 bar … 10 bar
Max. speed 0.8 m/s
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.15 J
Max. force Fy 304 N
Max. force Fy static 304 N
Max. force Fz 304 N
Max. force Fz static 304 N
Max. moment Mx 6.99 Nm
Max. torque Mx static 6.99 Nm
Max. moment My 2.89 Nm
Max. torque My static 2.89 Nm
Max. moment Mz 2.89 Nm
Max. torque Mz static 2.89 Nm
Max. permissible torque load Mx as a function of stroke 1.17 Nm
Max. effective load dependent upon stroke at defined distance xs 27 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 90 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 121 N
Moving mass 242 g
Product weight 507 g
alternative connections See product drawing
Pneumatic connection M5
Material cover Wrought aluminium alloy
Material seals NBR
Material housing Wrought aluminium alloy
Material piston rod High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DFM-16-20-P-A-GF, part number 170833, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DFM-16-20-P-A-GF as a guided drive under part number 170833. It lists distance from centre of gravity of load to yoke plate xs as 50 mm. Confirm the full variant before ordering.

Documentation Before Ordering

If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DFM-16-20-P-A-GF

Part number

170833

Product type

Guided Drive

Distance from centre of gravity of load to yoke plate xs

50 mm

Stroke

20 mm

Piston diameter

16 mm

Operating mode, drive unit

Yoke

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Guide

Plain-bearing guide

Design

Guidance