FESTO DHPS-10-A-NC 1254042 Parallel Gripper
The Festo DHPS-10-A-NC (part number 1254042) is a parallel gripper. Its product datasheet lists size as 10 and stroke per gripper jaws as 3 mm.
Description
FESTO DHPS-10-A-NC 1254042 Parallel Gripper
The Festo DHPS-10-A-NC (part number 1254042) is a parallel gripper. Its product datasheet lists size as 10 and stroke per gripper jaws as 3 mm.
Key Features
- Size: 10
- Stroke per gripper jaws: 3 mm
- Number of gripper jaws: 2
- Mode of operation: Double-acting
Technical Data
| Brand | FESTO |
|---|---|
| Model | DHPS-10-A-NC |
| Part number | 1254042 |
| Size | 10 |
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Gripper function | Parallel |
| Gripper force back-up | During closing |
| Design | Lever Force pilot operated motion sequence |
| Guide | Plain-bearing guide |
| Position detection | Via proximity switch |
| Operating pressure | 0.4 MPa … 0.8 MPa |
| Operating pressure | 4 bar … 8 bar |
| Operating pressure | 58 psi … 116 psi |
| Max. operating frequency of gripper | 4 Hz |
| Min. opening time at 0.6 MPa (6 bar, 87 psi) | 58 ms |
| Min. closing time at 0.6 MPa (6 bar, 87 psi) | 24 ms |
| Max. mass per external gripper finger | 60 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Suitability for the production of Li-ion batteries | Metals with more than 5% by mass of copper are excluded from use. Exceptions are printed circuit boards, cables, electrical connectors and coils. |
| Ambient temperature | 5 °C … 60 °C |
| Mass moment of inertia | 0.081 kgcm² |
| Max. force on gripper jaw Fz static | 60 N |
| Max. torque at gripper Mx static | 3 Nm |
| Max. torque at gripper My static | 3 Nm |
| Max. torque at gripper Mz static | 3 Nm |
| Lubrication interval for guide components | 10 MioCyc |
| Product weight | 68 g |
| Type of mounting | Either: Via female thread and centring sleeve Via through-hole and centring sleeve |
| Pneumatic connection | M3 |
| Note on materials | RoHS compliant |
| Material cover cap | PA |
| Material housing | Hard anodised wrought aluminium alloy |
| Material gripper jaws | High-alloy stainless steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model DHPS-10-A-NC, part number 1254042, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists number of gripper jaws as 2 for part number 1254042. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Operating Conditions Check
Before selecting DHPS-10-A-NC, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DHPS-10-A-NC |
| Part Number | 1254042 |
| Size | 10 |
| Stroke per gripper jaws | 3 mm |
| Max. replacement accuracy | ≤0.2 mm |
| Max. angular gripper jaw backlash ax, ay | <0.5 deg |
| Max. gripper jaw backlash Sz | <0.02 mm |
| Rotationally symmetrical | ≤0.2 mm |
| Repetition accuracy, gripper | <0.02 mm |
| Number of gripper jaws | 2 |









