FESTO DFPD-80-RP-90-RD-F0507 8047616 Quarter Turn Actuator

The Festo DFPD-80-RP-90-RD-F0507 (part number 8047616) is a quarter turn actuator. Its product datasheet lists size of valve actuator as 80 and swivel angle as 90 deg.

SKU: 8047616 Category: Tags: , , Brand:

Description

FESTO DFPD-80-RP-90-RD-F0507 8047616 Quarter Turn Actuator

The Festo DFPD-80-RP-90-RD-F0507 (part number 8047616) is a quarter turn actuator. Its product datasheet lists size of valve actuator as 80 and swivel angle as 90 deg.

Key Features

  • Size of valve actuator: 80
  • Swivel angle: 90 deg
  • Mode of operation: Double-acting
  • Operating pressure: 0.2 MPa … 0.8 MPa

Technical Data

Brand FESTO
Model DFPD-80-RP-90-RD-F0507
Part number 8047616
Size of valve actuator 80
Flange hole pattern F0507
Swivel angle 90 deg
End-position adjustment range at 0° -5 deg … 5 deg
End-position adjustment range at nominal swivel angle -5 deg … 5 deg
Shaft connection depth 19 mm
Fitting connection conforms to standard ISO 5211
Mounting position Any
Mode of operation Double-acting
Design Rack and pinion
Closing direction Closes to the right
Valve connection conforms to standard VDI/VDE 3845 (NAMUR)
Connection point for positioner and position sensor conforms to standard VDI/VDE 3845 size AA 1
Device type according to VDMA 66413 Safety device
Safety function The safety function consists of the actuator switching to the specified
safety switching position. This switching movement is achieved by
pressurising the corresponding pressure chamber with compressed air.
The value of the generated torque depends on the
Safety Integrity Level (SIL) up to SIL 2 Low Demand mode
Up to SIL 3 in a redundant architecture
Up to SIL 1 high demand mode
Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in SRP/CS up to SIL 2 (Low Demand)
Product can be used in SRP/CS up to SIL 1 (High Demand)
Up to SIL 3 in a redundant architecture
Burst pressure 24 bar
Operating pressure 0.2 MPa … 0.8 MPa
Operating pressure 2 bar … 8 bar
Operating pressure 29 psi … 116 psi
Nominal operating pressure 0.55 MPa
Nominal operating pressure 5.5 bar
Nominal operating pressure 79.75 psi
Maritime classification See certificate
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Dew point at least 10 °C below the ambient temperature and
temperature of the medium
Lubricated operation possible (in which case lubricated operation will
always be required)
Storage temperature -20 °C … 60 °C
Ambient temperature -20 °C … 80 °C
Torque at nominal operating pressure and 0° swivel angle 82.4 Nm
Torque at nominal operating pressure and 90° swivel angle 82.4 Nm
Note on torque The operating torque of the actuator must not be higher than the
maximum permissible torque listed in ISO 5211, with reference to the
size of the mounting flange and of the coupling.
Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° 7.4 l
Product weight 3308 g
Shaft connection T17
Pneumatic connection G1/8
Note on materials RoHS compliant
Material sub-base Anodised wrought aluminium alloy
Material cover Coated die-cast aluminium
Material seals NBR
Material housing Anodised aluminium
Material piston Die-cast aluminium
Material bearing POM
Material cam High-alloy stainless steel
Material screws High-alloy stainless steel
Material shaft Nickel-plated steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DFPD-80-RP-90-RD-F0507, part number 8047616, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists mode of operation as Double-acting for part number 8047616. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DFPD-80-RP-90-RD-F0507

Part Number

8047616

Size of valve actuator

80

Flange hole pattern

F0507

Swivel angle

90 deg

End-position adjustment range at 0°

-5 deg … 5 deg

End-position adjustment range at nominal swivel angle

-5 deg … 5 deg

Shaft connection depth

19 mm

Fitting connection conforms to standard

ISO 5211

Mounting position

Any