FESTO DHRS-10-A 1310159 Radial Gripper

The FESTO DHRS-10-A, part number 1310159, is a radial gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DHRS-10-A Category: Tags: , , Brand:

Description

FESTO DHRS-10-A 1310159 Radial Gripper

The FESTO DHRS-10-A, part number 1310159, is a radial gripper. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 10.
  • Max. replacement accuracy: ≤0.2 mm.
  • Max. opening angle: 180 deg.

Technical Data

Brand FESTO
Model DHRS-10-A
Part number 1310159
Product type Radial Gripper
Size 10
Max. replacement accuracy ≤0.2 mm
Max. opening angle 180 deg
Rotationally symmetrical ≤0.2 mm
Repetition accuracy, gripper ≤0.1 mm
Number of gripper jaws 2
Mounting position Any
Mode of operation Double-acting
Gripper function Radial
Design Force pilot operated motion sequence
Position detection Via Hall sensor
Operating pressure 2 bar … 8 bar
Max. operating frequency of gripper ≤4 Hz
Min. opening time at 0.6 MPa (6 bar, 87 psi) 35 ms
Min. closing time at 0.6 MPa (6 bar, 87 psi) 91 ms
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature 5 °C … 60 °C
Total gripping torque at 0.6 MPa (6 bar, 87 psi), opening 21 Ncm
Total gripper torque, closing, 0.6 MPa (6 bar, 87 psi) 15 Ncm
Mass moment of inertia 0.03 kgcm²
Max. force on gripper jaw Fz static 30 N
Max. torque at gripper Mx static 0.8 Nm
Max. torque at gripper My static 0.8 Nm
Max. torque at gripper Mz static 0.8 Nm
Product weight 44 g
Type of mounting Either: Via female thread and centring sleeve Via through-hole and centring sleeve
Pneumatic connection M3
Material cover cap PA
Material housing Hard anodised wrought aluminium alloy
Material gripper jaws High-alloy steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DHRS-10-A, part number 1310159, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DHRS-10-A as a radial gripper under part number 1310159. It lists size as 10. Confirm the full variant before ordering.

Spare Parts Records

Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DHRS-10-A

Part number

1310159

Product type

Radial Gripper

Size

10

Max. replacement accuracy

≤0.2 mm

Max. opening angle

180 deg

Rotationally symmetrical

≤0.2 mm

Repetition accuracy, gripper

≤0.1 mm

Number of gripper jaws

2

Mounting position

Any

Mode of operation

Double-acting