FESTO DSM-8-90-P-A 173197 Semi-Rotary Drive

The FESTO DSM-8-90-P-A, part number 173197, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DSM-8-90-P-A Category: Tags: , , Brand:

Description

FESTO DSM-8-90-P-A 173197 Semi-Rotary Drive

The FESTO DSM-8-90-P-A, part number 173197, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: 8.
  • Cushioning angle: 0.5 deg.
  • Swivel angle: 0 deg … 90 deg.

Technical Data

Brand FESTO
Model DSM-8-90-P-A
Part number 173197
Product type Semi-Rotary Drive
Size 8
Cushioning angle 0.5 deg
Swivel angle 0 deg … 90 deg
Permissible stop radius ≥10 mm
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Mode of operation Double-acting
Design Vane
Position detection Via proximity switch
Operating pressure 0.35 MPa … 0.8 MPa
Operating pressure 3.5 bar … 8 bar
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) 3 Hz
Repetition accuracy 1 deg
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 0 – No corrosion stress
Ambient temperature 0 °C … 60 °C
Max. stop force 30 N
Max. axial force 10 N
Max. radial force 20 N
Theoretical torque at 0.6 MPa (6 bar, 87 psi) 0.35 Nm
Permissible mass moment of inertia 0.0013 kgm²
Product weight 85 g
Type of mounting With female thread
Pneumatic connection M3
Material drive shaft High-alloy stainless steel
Material seals TPE-U(PU)
Material housing anodised

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DSM-8-90-P-A, part number 173197, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DSM-8-90-P-A as a semi-rotary drive under part number 173197. It lists size as 8. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

DSM-8-90-P-A

Part number

173197

Product type

Semi-Rotary Drive

Size

8

Cushioning angle

0.5 deg

Swivel angle

0 deg … 90 deg

Permissible stop radius

≥10 mm

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Mode of operation

Double-acting

Design

Vane