FESTO DGSC-6-10-P-P 569792 Mini Slide

The Festo DGSC-6-10-P-P (part number 569792) is a mini slide. Its product datasheet lists stroke as 10 mm and piston diameter as 6 mm.

SKU: 569792 Category: Tags: , , Brand:

Description

FESTO DGSC-6-10-P-P 569792 Mini Slide

The Festo DGSC-6-10-P-P (part number 569792) is a mini slide. Its product datasheet lists stroke as 10 mm and piston diameter as 6 mm.

Key Features

  • Stroke: 10 mm
  • Piston diameter: 6 mm
  • Guide: Ball bearing cage guide
  • Operating pressure: 0.1 MPa … 0.6 MPa

Technical Data

Brand FESTO
Model DGSC-6-10-P-P
Part number 569792
Stroke 10 mm
Piston diameter 6 mm
Operating mode, drive unit Yoke
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Guide Ball bearing cage guide
Design Scotch yoke system
Position detection None
Operating pressure 0.1 MPa … 0.6 MPa
Operating pressure 1 bar … 6 bar
Operating pressure 14.5 psi … 87 psi
Repetition accuracy 0.2 mm
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature 10 °C … 50 °C
Max. force Fy 20 N
Max. force Fz 20 N
Max. moment Mx 0.3 Nm
Max. moment My 0.4 Nm
Max. moment Mz 0.4 Nm
Max. effective load dependent upon stroke at defined distance xs 30 N
Max. effective load 0.03 kg
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 12.7 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 17 N
Moving mass 17 g
Product weight 52 g
Type of mounting Via female thread and dowel pin
Pneumatic connection M3
Note on materials RoHS compliant
Material cover POM
Material seals NBR
Material guide High-alloy steel
Material housing High-alloy stainless steel
Material piston rod High-alloy stainless steel

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DGSC-6-10-P-P, part number 569792, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists guide as Ball bearing cage guide for part number 569792. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DGSC-6-10-P-P

Part Number

569792

Stroke

10 mm

Piston diameter

6 mm

Operating mode, drive unit

Yoke

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Guide

Ball bearing cage guide

Design

Scotch yoke system

Position detection

None