FESTO EGSC-BS-KF-25-25-6P 8048310 Mini Slide
The Festo EGSC-BS-KF-25-25-6P (part number 8048310) is a mini slide. Its product datasheet lists working stroke as 25 mm and size as 25.
Description
FESTO EGSC-BS-KF-25-25-6P 8048310 Mini Slide
The Festo EGSC-BS-KF-25-25-6P (part number 8048310) is a mini slide. Its product datasheet lists working stroke as 25 mm and size as 25.
Key Features
- Working stroke: 25 mm
- Size: 25
- Stroke reserve: 0 mm
- Spindle pitch: 6 mm/U
Technical Data
| Brand | FESTO |
|---|---|
| Model | EGSC-BS-KF-25-25-6P |
| Part number | 8048310 |
| Working stroke | 25 mm |
| Size | 25 |
| Stroke reserve | 0 mm |
| Reversing backlash theoretical | 150 µm |
| Spindle diameter | 6 mm |
| Spindle pitch | 6 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor Servo motor |
| Referencing | Positive fixed stop block Negative fixed stop block Reference switch |
| Spindle type | Ball screw |
| Position detection | Via proximity switch |
| Max. acceleration | 15 m/s² |
| Max. rotational speed | 4000 rpm |
| Max. speed | 0.4 m/s |
| Repetition accuracy | ±0.015 mm |
| Duty cycle | 100% |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 9 according to ISO 14644-1 |
| Sound pressure level | 50 dB(A) |
| Degree of protection | IP40 |
| Ambient temperature | 0 °C … 50 °C |
| Impact energy in end positions | 5.0E-6 J |
| Note on the impact energy in the end positions | At maximum homing speed of 0.01 m/s |
| Dynamic basic load rating fixed bearing | 2810 N |
| Dynamic basic load rating linear guide | 1310 N |
| Dynamic basic load rating ball screw | 1700 N |
| Idle torque at vmax | 0.029 Nm |
| Idle torque at vmin | 0.015 Nm |
| Max. force Fy | 669 N |
| Max. force Fz | 669 N |
| Max. radial force at drive shaft | 30 N |
| Max. feed force Fx | 20 N |
| Product weight | 223 g |
| Basic weight for 0 mm stroke | 176 g |
| Additional weight per 10 mm stroke | 19 g |
| Type of mounting | With female thread With centring sleeve With accessories Via cylindrical dowel pin |
| Note on materials | RoHS compliant |
| Material guide slide | Bearing steel |
| Material guide rail | Bearing steel |
| Material housing | Anodised wrought aluminium alloy |
| Material yoke plate | Anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
| Material slide | Anodised wrought aluminium alloy |
| Material ball screw nut | Bearing steel |
| Material spindle | Bearing steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model EGSC-BS-KF-25-25-6P, part number 8048310, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists stroke reserve as 0 mm for part number 8048310. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Maintenance Inspection
Before replacing EGSC-BS-KF-25-25-6P, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | EGSC-BS-KF-25-25-6P |
| Part Number | 8048310 |
| Working stroke | 25 mm |
| Size | 25 |
| Stroke reserve | 0 mm |
| Reversing backlash theoretical | 150 µm |
| Spindle diameter | 6 mm |
| Spindle pitch | 6 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |









