FESTO DSBC-80-200-PPSA-N3 1383373 Iso Cylinder
The FESTO DSBC-80-200-PPSA-N3, part number 1383373, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSBC-80-200-PPSA-N3 1383373 Iso Cylinder
The FESTO DSBC-80-200-PPSA-N3, part number 1383373, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 200 mm.
- Piston diameter: 80 mm.
- Piston rod thread: M20x1.5.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSBC-80-200-PPSA-N3 |
| Part number | 1383373 |
| Product type | Iso Cylinder |
| Stroke | 200 mm |
| Piston diameter | 80 mm |
| Piston rod thread | M20x1.5 |
| Cushioning | Self-adjusting pneumatic end-position cushioning |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Profile barrel |
| Position detection | Via proximity switch |
| Operating pressure | 0.04 MPa … 1.2 MPa |
| Operating pressure | 0.4 bar … 12 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 1.8 J |
| Cushioning length | 31 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 2721 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 3016 N |
| Moving mass | 1590 g |
| Moving mass for 0 mm stroke | 810 g |
| Additional moving mass per 10 mm stroke | 39 g |
| Product weight | 4500 g |
| Basic weight for 0 mm stroke | 2660 g |
| Additional weight per 10 mm stroke | 92 g |
| Type of mounting | With female thread With accessories |
| Pneumatic connection | G3/8 |
| Material cover | Coated die-cast aluminium |
| Material piston seal | TPE-U(PU) |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy steel |
| Material piston rod wiper | TPE-U(PU) |
| Buffer seal material | TPE-U(PU) |
| Material of cushioning boss | POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel |
| Material bearing | POM |
| Material collar screws | Galvanised steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSBC-80-200-PPSA-N3, part number 1383373, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSBC-80-200-PPSA-N3 as a iso cylinder under part number 1383373. It lists stroke as 200 mm. Confirm the full variant before ordering.
Documentation Before Ordering
If the original part has an unclear suffix or incomplete marking, gather the available information before placing an order. Photos of the nameplate, the equipment manual, previous purchase records, and connection details can help narrow down the correct version. Keep any specification that remains uncertain open for confirmation instead of assuming a match.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSBC-80-200-PPSA-N3 |
| Part number | 1383373 |
| Product type | Iso Cylinder |
| Stroke | 200 mm |
| Piston diameter | 80 mm |
| Piston rod thread | M20x1.5 |
| Cushioning | Self-adjusting pneumatic end-position cushioning |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Profile barrel |
| Position detection | Via proximity switch |







