FESTO DSBC-50-50-PPVA-N3 1366950 Iso Cylinder
The FESTO DSBC-50-50-PPVA-N3, part number 1366950, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSBC-50-50-PPVA-N3 1366950 Iso Cylinder
The FESTO DSBC-50-50-PPVA-N3, part number 1366950, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 50 mm.
- Piston diameter: 50 mm.
- Piston rod thread: M16x1.5.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSBC-50-50-PPVA-N3 |
| Part number | 1366950 |
| Product type | Iso Cylinder |
| Stroke | 50 mm |
| Piston diameter | 50 mm |
| Piston rod thread | M16x1.5 |
| Cushioning | Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Profile barrel |
| Position detection | Via proximity switch |
| Operating pressure | 0.04 MPa … 1.2 MPa |
| Operating pressure | 0.4 bar … 12 bar |
| Mode of operation | Double-acting |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 1 J |
| Cushioning length | 22 mm |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 990 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 1178 N |
| Moving mass | 490 g |
| Moving mass for 0 mm stroke | 365 g |
| Additional moving mass per 10 mm stroke | 25 g |
| Product weight | 1470 g |
| Basic weight for 0 mm stroke | 1190 g |
| Additional weight per 10 mm stroke | 56 g |
| Type of mounting | With female thread With accessories |
| Pneumatic connection | G1/4 |
| Material cover | Coated die-cast aluminium |
| Material piston seal | TPE-U(PU) |
| Material piston | Wrought aluminium alloy |
| Material piston rod | High-alloy steel |
| Material piston rod wiper | TPE-U(PU) |
| Buffer seal material | TPE-U(PU) |
| Material of cushioning boss | POM |
| Material cylinder barrel | Smooth-anodised wrought aluminium alloy |
| Material nut | Galvanised steel |
| Material bearing | POM |
| Material collar screws | Galvanised steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSBC-50-50-PPVA-N3, part number 1366950, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSBC-50-50-PPVA-N3 as a iso cylinder under part number 1366950. It lists stroke as 50 mm. Confirm the full variant before ordering.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSBC-50-50-PPVA-N3 |
| Part number | 1366950 |
| Product type | Iso Cylinder |
| Stroke | 50 mm |
| Piston diameter | 50 mm |
| Piston rod thread | M16x1.5 |
| Cushioning | Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Piston-rod end | Male thread |
| Design | Piston Piston rod Profile barrel |
| Position detection | Via proximity switch |






