FESTO DSNU-12-145-PPV-A 193988 Iso Cylinder
The FESTO DSNU-12-145-PPV-A, part number 193988, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSNU-12-145-PPV-A 193988 Iso Cylinder
The FESTO DSNU-12-145-PPV-A, part number 193988, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Piston diameter: 12 mm.
- Cushioning: Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends.
- Mounting position: Any.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSNU-12-145-PPV-A |
| Part number | 193988 |
| Product type | Iso Cylinder |
| Piston diameter | 12 mm |
| Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Design | Piston Piston rod Cylinder barrel |
| Position detection | Via proximity switch |
| Protection against torque/guide | Square piston rod |
| Operating pressure | 0.15 MPa … 1 MPa |
| Operating pressure | 1.5 bar … 10 bar |
| Mode of operation | Double-acting |
| Explosion protection certification outside the EU | EPL Gb (GB) |
| ATEX category gas | II 2G |
| ATEX category dust | II 2D |
| Explosion ignition protection type for gas | Ex h IIC T4 Gb |
| Explosion ignition protection type for dust | Ex h IIIC T120°C Db |
| Explosion ambient temperature | -20°C <= Ta <= +60°C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress 3 – high corrosion stress |
| Ambient temperature | -20 °C … 120 °C |
| Impact energy in end positions | 0.035 J … 0.07 J |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 51 N … 68 N |
| Type of mounting | With accessories |
| Pneumatic connection | M5 |
| Material cover | Wrought aluminium alloy |
| Material seals | NBR TPE-U(PU) |
| Material piston rod | High-alloy stainless steel |
| Material cylinder barrel | High-alloy stainless steel |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSNU-12-145-PPV-A, part number 193988, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSNU-12-145-PPV-A as a iso cylinder under part number 193988. It lists piston diameter as 12 mm. Confirm the full variant before ordering.
Spare Parts Records
Keeping a clear record of installed components can make future maintenance and purchasing more efficient. For this product, record the brand, full model code, important specifications, and equipment location. Update the record whenever a component or machine configuration changes, so the next replacement decision is based on current information.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSNU-12-145-PPV-A |
| Part number | 193988 |
| Product type | Iso Cylinder |
| Piston diameter | 12 mm |
| Cushioning | Elastic cushioning rings/plates at both ends Pneumatic cushioning, adjustable at both ends |
| Mounting position | Any |
| Design | Piston Piston rod Cylinder barrel |
| Position detection | Via proximity switch |
| Protection against torque/guide | Square piston rod |
| Operating pressure | 1.5 bar … 10 bar |





