FESTO DSNU-16-40-P-A 19200 Iso Cylinder

The FESTO DSNU-16-40-P-A, part number 19200, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DSNU-16-40-P-A Category: Tags: , , Brand:

Description

FESTO DSNU-16-40-P-A 19200 Iso Cylinder

The FESTO DSNU-16-40-P-A, part number 19200, is a iso cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Stroke: 40 mm.
  • Piston diameter: 16 mm.
  • Piston rod thread: M6.

Technical Data

Brand FESTO
Model DSNU-16-40-P-A
Part number 19200
Product type Iso Cylinder
Stroke 40 mm
Piston diameter 16 mm
Piston rod thread M6
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Piston-rod end Male thread
Design Piston Piston rod Cylinder barrel
Position detection Via proximity switch
Operating pressure 0.1 MPa … 1 MPa
Operating pressure 1 bar … 10 bar
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.15 J
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 103.7 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 120.6 N
Moving mass for 0 mm stroke 23 g
Additional moving mass per 10 mm stroke 2 g
Basic weight for 0 mm stroke 89.9 g
Additional weight per 10 mm stroke 4.6 g
Type of mounting With accessories
Pneumatic connection M5
Material cover Wrought aluminium alloy Colourless anodised
Material seals NBR TPE-U(PU)
Material piston rod High-alloy stainless steel
Material cylinder barrel High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DSNU-16-40-P-A, part number 19200, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DSNU-16-40-P-A as a iso cylinder under part number 19200. It lists stroke as 40 mm. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting DSNU-16-40-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

DSNU-16-40-P-A

Part number

19200

Product type

Iso Cylinder

Stroke

40 mm

Piston diameter

16 mm

Piston rod thread

M6

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Piston-rod end

Male thread

Design

Piston Piston rod Cylinder barrel

Position detection

Via proximity switch