FESTO LR-1/8-D-MINI-MPA 8002274 Pressure Regulator

The FESTO LR-1/8-D-MINI-MPA, part number 8002274, is a pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: LR-1/8-D-MINI-MPA Category: Tags: , , Brand:

Description

FESTO LR-1/8-D-MINI-MPA 8002274 Pressure Regulator

The FESTO LR-1/8-D-MINI-MPA, part number 8002274, is a pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Size: Mini.
  • Series: D.
  • Actuator lock: Rotary knob with detent.

Technical Data

Brand FESTO
Model LR-1/8-D-MINI-MPA
Part number 8002274
Product type Pressure Regulator
Size Mini
Series D
Actuator lock Rotary knob with detent
Mounting position Any
Design Directly actuated diaphragm regulator
Controller function Output pressure constant With primary pressure compensation With secondary exhausting
Pressure gauge (ANALOG) or Pressure display (DIGITAL) With pressure gauge
Operating pressure 0.1 MPa … 1.6 MPa
Operating pressure 1 bar … 16 bar
Pressure regulation range 0.5 bar … 12 bar
Max. pressure hysteresis 0.02 MPa
Max. pressure hysteresis 0.2 bar
Max. pressure hysteresis 2.9 psi
Standard nominal flow rate (standardised to DIN 1343) 800 l/min
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Air purity class at output Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas
Media temperature -10 °C … 60 °C
Ambient temperature -10 °C … 60 °C
Product weight 350 g
Type of mounting With accessories
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Material sub-base Die-cast zinc
Material seals NBR
Material housing Die-cast zinc

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model LR-1/8-D-MINI-MPA, part number 8002274, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies LR-1/8-D-MINI-MPA as a pressure regulator under part number 8002274. It lists size as Mini. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

LR-1/8-D-MINI-MPA

Part number

8002274

Product type

Pressure Regulator

Size

Mini

Series

D

Actuator lock

Rotary knob with detent

Mounting position

Any

Design

Directly actuated diaphragm regulator

Controller function

Output pressure constant With primary pressure compensation With secondary exhausting

Pressure gauge (ANALOG) or Pressure display (DIGITAL)

With pressure gauge

Operating pressure

0.1 MPa … 1.6 MPa