FESTO PE-VK-5.1 7451 Pe Converter
The FESTO PE-VK-5.1, part number 7451, is a pe converter. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO PE-VK-5.1 7451 Pe Converter
The FESTO PE-VK-5.1, part number 7451, is a pe converter. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Measured variable: Relative pressure.
- Measurement method: Pneumatic/electric pressure transducer.
- Operating pressure: 0 MPa … 0.025 MPa.
Technical Data
| Brand | FESTO |
|---|---|
| Model | PE-VK-5.1 |
| Part number | 7451 |
| Product type | Pe Converter |
| Measured variable | Relative pressure |
| Measurement method | Pneumatic/electric pressure transducer |
| Operating pressure | 0 MPa … 0.025 MPa |
| Operating pressure | 0 bar … 0.25 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Ambient temperature | -10 °C … 50 °C |
| Switching output | conventional |
| Switching function | Threshold value with fixed hysteresis |
| Switching element function | Changeover switch |
| Switch-on point | 5.0E-4 bar |
| Switch-off point | 1.0E-4 bar |
| Max. switching output voltage AC | 250 V |
| Max. switching output voltage DC | 250 V |
| Utilisation category – inductive load | AC-14 DC-13 |
| Utilisation category – resistive load | AC-12 DC-12 |
| Electrical connection | 4-core Cable |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connector system | Open end |
| Cable length | 1 m |
| Material cable sheath | PVC |
| Type of mounting | With through-hole |
| Mounting position | Any |
| Pneumatic connection | M5 |
| Product weight | 250 g |
| Material housing | ABS Die-cast aluminium Anodised aluminium |
| Setting options | Permanently set |
| Degree of protection | IP62 |
| Insulation voltage | 2000 V |
| Pollution degree | 3 |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model PE-VK-5.1, part number 7451, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies PE-VK-5.1 as a pe converter under part number 7451. It lists measured variable as Relative pressure. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | PE-VK-5.1 |
| Part number | 7451 |
| Product type | Pe Converter |
| Measured variable | Relative pressure |
| Measurement method | Pneumatic/electric pressure transducer |
| Operating pressure | 0 bar … 0.25 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:-:-] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Ambient temperature | -10 °C … 50 °C |
| Switching output | conventional |









