FESTO SLT-6-20-P-A 170550 Mini Slide
The FESTO SLT-6-20-P-A, part number 170550, is a mini slide. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SLT-6-20-P-A 170550 Mini Slide
The FESTO SLT-6-20-P-A, part number 170550, is a mini slide. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 20 mm.
- Adjustable end-position range/length: 7 mm.
- Piston diameter: 6 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SLT-6-20-P-A |
| Part number | 170550 |
| Product type | Mini Slide |
| Stroke | 20 mm |
| Adjustable end-position range/length | 7 mm |
| Piston diameter | 6 mm |
| Operating mode of drive unit | Yoke |
| Cushioning | P: Flexible cushioning rings/plates at both ends |
| Assembly position | Any |
| Guide | Ball bearing cage guide |
| Design structure | Yoke kinematics |
| Position detection | For proximity sensor |
| Operating pressure | 1.5 … 10 bar |
| Mode of operation | double-acting |
| Operating medium | Compressed air in accordance with ISO8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (subsequently required for further operation) |
| Corrosion resistance classification CRC | 0 – No corrosion stress |
| Ambient temperature | -20 … 60 °C |
| Impact energy in end positions | 0.016 Nm |
| Max. force Fy | 160 N |
| Max. force Fz | 160 N |
| Max. torque Mx | 1.1 Nm |
| Max. torque My | 1.1 Nm |
| Max. torque Mz | 0.7 Nm |
| Theoretical force at 6 bar, return stroke | 25 N |
| Theoretical force at 6 bar, advance stroke | 34 N |
| Moving mass | 47 g |
| Product weight | 114 g |
| alternative connections | See product drawing |
| Mounting type | with through hole |
| Pneumatic connection | M5 |
| Material cover | Wrought Aluminium alloy |
| Material seals | HNBR |
| Material housing | Wrought Aluminium alloy |
| Material piston rod | High alloy steel, non-corrosive |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SLT-6-20-P-A, part number 170550, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SLT-6-20-P-A as a mini slide under part number 170550. It lists stroke as 20 mm. Confirm the full variant before ordering.
Full Model Verification
Use the full model code when confirming FESTO SLT-6-20-P-A 170550 Mini Slide. A shared series name does not mean two versions have the same voltage, port size, material, or mounting arrangement. Compare the original nameplate with the available datasheet, equipment records, and installation details to identify the exact version required.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | SLT-6-20-P-A |
| Part number | 170550 |
| Product type | Mini Slide |
| Stroke | 20 mm |
| Adjustable end-position range/length | 7 mm |
| Piston diameter | 6 mm |
| Operating mode of drive unit | Yoke |
| Cushioning | P: Flexible cushioning rings/plates at both ends |
| Assembly position | Any |
| Guide | Ball bearing cage guide |
| Design structure | Yoke kinematics |







