FESTO SMT-10G-NS-24V-E-2,5Q-OE 8065030 Proximity Sensor

The FESTO SMT-10G-NS-24V-E-2,5Q-OE, part number 8065030, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SMT-10G-NS-24V-E-2,5Q-OE Category: Tags: , , Brand:

Description

FESTO SMT-10G-NS-24V-E-2,5Q-OE 8065030 Proximity Sensor

The FESTO SMT-10G-NS-24V-E-2,5Q-OE, part number 8065030, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For C-slot.
  • Measured variable: Position.
  • Measuring principle: Magneto-resistive.

Technical Data

Brand FESTO
Model SMT-10G-NS-24V-E-2,5Q-OE
Part number 8065030
Product type Proximity Sensor
Design For C-slot
Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature -20 °C … 70 °C
Repetition accuracy 0.2 mm
Switching output NPN
Switching element function N/O contact
Switch-on time ≤1 ms
Switch-off time ≤1 ms
Max. switching frequency 150 Hz
Max. output current 100 mA
Max. switching capacity DC 2.8 W
Voltage drop ≤2 V
Inductive protective circuit Adapted to MZ, MY, ME coils
Off-state current ≤0.15 mA
Short circuit current rating Yes
Overload protection Yes
Rated operational voltage DC 24 V
Operational voltage range DC 10 V … 30 V
Residual ripple 10%
Reverse polarity protection For all electrical connections
Electrical connection 1, connection type Cable
Electrical connection 1, connector system Open end
Electrical connection 1, number of connections/cores 3
Connection outlet orientation Lateral
Test conditions cable Bending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm
Cable length 2.5 m
Cable characteristic Suitable for energy chains/robot applications
Cable sheath colour Grey
Material cable sheath TPE-U(PU)
Wire ends Wire ferrule
Type of mounting Clamped in C-slot Inserted into the slot lengthwise
Max. tightening torque 0.6 Nm
Mounting position Any
Product weight 30 g
Housing colour Black
Material housing Aluminium Reinforced PA High-alloy stainless steel
Switching status indication Yellow LED
Ambient temperature with moving cable -5 °C … 70 °C
Degree of protection IP65 IP68

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SMT-10G-NS-24V-E-2,5Q-OE, part number 8065030, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SMT-10G-NS-24V-E-2,5Q-OE as a proximity sensor under part number 8065030. It lists design as For C-slot. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

SMT-10G-NS-24V-E-2,5Q-OE

Part number

8065030

Product type

Proximity Sensor

Design

For C-slot

Measured variable

Position

Measuring principle

Magneto-resistive

Ambient temperature

-20 °C … 70 °C

Repetition accuracy

0.2 mm

Switching output

NPN

Switching element function

N/O contact

Switch-on time

≤1 ms