FESTO VPPE-3-1-1/8-2-420-E1 557774 Proportional-Pressure Regulator

The FESTO VPPE-3-1-1/8-2-420-E1, part number 557774, is a proportional-pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: VPPE-3-1-1/8-2-420-E1 Category: Tags: , , Brand:

Description

FESTO VPPE-3-1-1/8-2-420-E1 557774 Proportional-Pressure Regulator

The FESTO VPPE-3-1-1/8-2-420-E1, part number 557774, is a proportional-pressure regulator. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Nominal size, supply: 5 mm.
  • Nominal size, exhaust: 2.5 mm.
  • Type of actuation: Electrical.

Technical Data

Brand FESTO
Model VPPE-3-1-1/8-2-420-E1
Part number 557774
Product type Proportional-Pressure Regulator
Nominal size, supply 5 mm
Nominal size, exhaust 2.5 mm
Type of actuation Electrical
Sealing principle Soft
Mounting position Any Preferably upright
Design Piloted diaphragm regulator
Short circuit current rating For all electrical connections
Safety instructions Safety position VPPE: if the power supply cable is interrupted, output pressure is maintained unregulated.
Reverse polarity protection For all electrical connections
Type of reset Mechanical spring
Type of piloting Piloted
Valve function 3-way proportional pressure regulator
Display type LED indicator 3 digits
Pressure regulation range 0.002 MPa … 0.2 MPa
Pressure regulation range 0.02 bar … 2 bar
Inlet pressure 1 3 bar … 4 bar
Inlet pressure 1 0.3 MPa … 0.4 MPa
Max. pressure hysteresis 0.002 MPa
Max. pressure hysteresis 0.02 bar
Max. pressure hysteresis 0.29 psi
Standard nominal flow rate (standardised to DIN 1343) 310 l/min
Operational voltage range DC 21.6 V … 26.4 V
Max. current consumption 160 mA
Duty cycle 100%
Max. electrical power consumption 4.2 W
Residual ripple 10%
Switching output PNP
Signal range analogue output 4 – 20 mA
Signal range analogue input 4 – 20 mA
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas
Note on operating and pilot medium Lubricated operation not possible
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature 10 °C … 50 °C
Degree of protection IP65
Ambient temperature 0 °C … 60 °C
Product weight 390 g
Linearity 1 %FS
Hysteresis 1 %FS
Reproducibility 0.5 %FS
Total accuracy 1.5 %FS
Temperature cooefficient 0.04 %/K
Electrical connection 5-pin M12 Plug
Type of mounting With through-hole
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Material housing Anodised wrought aluminium alloy

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model VPPE-3-1-1/8-2-420-E1, part number 557774, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies VPPE-3-1-1/8-2-420-E1 as a proportional-pressure regulator under part number 557774. It lists nominal size, supply as 5 mm. Confirm the full variant before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

VPPE-3-1-1/8-2-420-E1

Part number

557774

Product type

Proportional-Pressure Regulator

Nominal size, supply

5 mm

Nominal size, exhaust

2.5 mm

Type of actuation

Electrical

Sealing principle

Soft

Mounting position

Any Preferably upright

Design

Piloted diaphragm regulator

Short circuit current rating

For all electrical connections

Safety instructions

Safety position VPPE: if the power supply cable is interrupted, output pressure is maintained unregulated.