Showing 145–160 of 1549 results
-

The Festo CPX-M-GE-EV-S-7/8-5POL (part number 550208) is an interlinking block. Its product datasheet lists type of mounting as Angled fitting and electrical connection as 5-pin 7/8'' round plug connector.
-

The Festo CPX-M-GE-EV-S-PP-5POL (part number 563057) is an interlinking block. Its product datasheet lists type of mounting as Angled fitting and electrical connection as 5-pin AIDA push-pull Plug.
-

The FESTO CRDNGS-63-PPV-A, part number 125716, is a set of wearing parts for the corresponding CRDNGS cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.
-

The FESTO CRDNGS-80-PPV-A, part number 125717, is a set of wearing parts for the corresponding CRDNGS cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.
-

The Festo CRDSNU-12-10-P-A is a standards-based, double-acting pneumatic cylinder with a 12 mm piston diameter and 10 mm stroke. The datasheet lists conformity to ISO 6432 and an M5 pneumatic connection.
-

The FESTO CRSMEO-4-K-LED-24, part number 161775, is a proximity sensor. The product datasheet specifies magnetic-reed position sensing, a normally open output and a 2.5 m cable.
-

The FESTO CRSMT-8M-PS-24V-K-5,0-OE-EX2, part number 574380, is a T-slot proximity sensor. The product datasheet specifies magneto-resistive position sensing, PNP normally open output and a 5 m cable.
-

The Festo CRVZS-0.4 (part number 160234) is a air reservoir. Its product datasheet lists operating pressure as -0.095 MPa … 1.6 MPa and pneumatic connection as G1/4.
-

The FESTO CRVZS-0.75, part number 160235, is a air reservoir. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
-

The FESTO CRVZS-2, part number 160236, is an air reservoir. Its product datasheet specifies 2 l volume, G1/2 pneumatic connection and a stainless steel reservoir.
-

The FESTO CRVZS-2-SA, part number 562443, is an air reservoir. The package label confirms the model, material number and product type.
-

The Festo CTEU-EC (part number 572556) is a bus node. Its product datasheet lists type of mounting as On electrical interface On electrical connection block and ambient temperature as 0 °C … 50 °C.
-

The FESTO CTEU-EP, part number 2798071, is a bus node. Its exact-model datasheet lists protocol as EtherNet/IP Modbus TCP and dimensions (w x l x h) as 40 mm x 91 mm x 50 mm.
-

The Festo CTEU-PN (part number 2201471) is a bus node. Its product datasheet lists type of mounting as On electrical interface On electrical connection block and ambient temperature as 0 °C … 50 °C.
-

The FESTO DAMT-V1-40-A, part number 2214899, is a trunnion mounting kit. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.