FESTO DAMT-V1-50-A 2214909 Trunnion Mounting Kit
The FESTO DAMT-V1-50-A, part number 2214909, is a trunnion mounting kit. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Showing 161–176 of 1549 results

The FESTO DAMT-V1-50-A, part number 2214909, is a trunnion mounting kit. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DAMT-V1-63-A, part number 2214971, is a trunnion mounting kit. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The Festo DAPS-0015-090-R-F03 is a double-acting quarter-turn actuator with a 90° swivel angle. Its datasheet specifies an F03 flange pattern, 1 to 8.4 bar operating pressure and G1/8 pneumatic connection.

The Festo DAPS-0015-090-RS4-F04 is a single-acting quarter-turn actuator with a 90° swivel angle and F04 flange pattern. The datasheet specifies a 5.6 to 8.4 bar operating-pressure range.

The FESTO DFM-100-PA, part number 394803, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.

The FESTO DFM-12-20-P-A-GF, part number 170825, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DFM-12-30-P-A-GF, part number 170827, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DFM-16-20-P-A-GF, part number 170833, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DFM-16-50-P-A-GF, part number 170837, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DFM-16-PA, part number 8047214, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.

The FESTO DFM-20-PA, part number 8047215, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.

The FESTO DFM-25-PA, part number 8047216, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.

The Festo DFM-32-20-P-A-GF is a double-acting guided drive with a 32 mm piston diameter and 20 mm stroke. It has a plain-bearing guide and a G1/8 pneumatic connection.

The FESTO DFM-32-PA, part number 8047217, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.

The FESTO DFM-40-25-P-A-KF, part number 170939, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

The FESTO DFM-40-PA, part number 8047218, is a set of wearing parts for the corresponding DFM cylinder or actuator configuration. The package label identifies the kit model and order number. Confirm both against the installed unit before ordering.