FESTO DFM-12-30-P-A-GF 170827 Guided Drive

The FESTO DFM-12-30-P-A-GF, part number 170827, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DFM-12-30-P-A-GF Category: Tags: , , Brand:

Description

FESTO DFM-12-30-P-A-GF 170827 Guided Drive

The FESTO DFM-12-30-P-A-GF, part number 170827, is a guided drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Distance from centre of gravity of load to yoke plate xs: 25 mm.
  • Stroke: 30 mm.
  • Piston diameter: 12 mm.

Technical Data

Brand FESTO
Model DFM-12-30-P-A-GF
Part number 170827
Product type Guided Drive
Distance from centre of gravity of load to yoke plate xs 25 mm
Stroke 30 mm
Piston diameter 12 mm
Operating mode, drive unit Yoke
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Guide Plain-bearing guide
Design Guidance
Position detection Via proximity switch
Operating pressure 0.2 MPa … 1 MPa
Operating pressure 2 bar … 10 bar
Max. speed 0.8 m/s
Mode of operation Double-acting
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 1 – Low corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.07 J
Max. force Fy 240 N
Max. force Fy static 240 N
Max. force Fz 240 N
Max. force Fz static 240 N
Max. moment Mx 4.92 Nm
Max. torque Mx static 4.92 Nm
Max. moment My 2.06 Nm
Max. torque My static 2.06 Nm
Max. moment Mz 2.06 Nm
Max. torque Mz static 2.06 Nm
Max. permissible torque load Mx as a function of stroke 0.63 Nm
Max. effective load dependent upon stroke at defined distance xs 22 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 51 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 68 N
Moving mass 200 g
Product weight 435 g
alternative connections See product drawing
Pneumatic connection M5
Material cover Wrought aluminium alloy
Material seals NBR
Material housing Wrought aluminium alloy
Material piston rod High-alloy stainless steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DFM-12-30-P-A-GF, part number 170827, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DFM-12-30-P-A-GF as a guided drive under part number 170827. It lists distance from centre of gravity of load to yoke plate xs as 25 mm. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting DFM-12-30-P-A-GF, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Payment Arrangements

The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.

Additional information

Brand

FESTO

Model

DFM-12-30-P-A-GF

Part number

170827

Product type

Guided Drive

Distance from centre of gravity of load to yoke plate xs

25 mm

Stroke

30 mm

Piston diameter

12 mm

Operating mode, drive unit

Yoke

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Guide

Plain-bearing guide

Design

Guidance