FESTO ADVU-32-40-P-A 156536 Compact Cylinder
The FESTO ADVU-32-40-P-A, part number 156536, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO ADVU-32-40-P-A 156536 Compact Cylinder
The FESTO ADVU-32-40-P-A, part number 156536, is a compact cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Stroke: 40 mm.
- Piston diameter: 32 mm.
- Piston rod thread: M6.
Technical Data
| Brand | FESTO |
|---|---|
| Model | ADVU-32-40-P-A |
| Part number | 156536 |
| Product type | Compact Cylinder |
| Stroke | 40 mm |
| Piston diameter | 32 mm |
| Piston rod thread | M6 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Piston-rod end | Female thread |
| Design | Piston Piston rod |
| Position detection | Via proximity switch |
| Operating pressure | 0.08 MPa … 1 MPa |
| Operating pressure | 0.8 bar … 10 bar |
| Operating pressure | 11.6 psi … 145 psi |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Impact energy in end positions | 0.4 J |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 415 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 483 N |
| Moving mass for 0 mm stroke | 49 g |
| Additional moving mass per 10 mm stroke | 9 g |
| Basic weight for 0 mm stroke | 300 g |
| Additional weight per 10 mm stroke | 40 g |
| Type of mounting | With through-hole With accessories |
| Pneumatic connection | G1/8 |
| Material collar screws | Galvanised steel |
| Material cover | Wrought aluminium alloy |
| Material dynamic seals | NBR TPE-U(PU) |
| Material piston rod | High-alloy stainless steel |
| Material cylinder barrel | Wrought aluminium alloy |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model ADVU-32-40-P-A, part number 156536, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies ADVU-32-40-P-A as a compact cylinder under part number 156536. It lists stroke as 40 mm. Confirm the full variant before ordering.
Operating Conditions Check
Before selecting ADVU-32-40-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | ADVU-32-40-P-A |
| Part number | 156536 |
| Product type | Compact Cylinder |
| Stroke | 40 mm |
| Piston diameter | 32 mm |
| Piston rod thread | M6 |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Piston-rod end | Female thread |
| Design | Piston Piston rod |





