FESTO DSM-8-90-P-A 173197 Semi-Rotary Drive
The FESTO DSM-8-90-P-A, part number 173197, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO DSM-8-90-P-A 173197 Semi-Rotary Drive
The FESTO DSM-8-90-P-A, part number 173197, is a semi-rotary drive. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Size: 8.
- Cushioning angle: 0.5 deg.
- Swivel angle: 0 deg … 90 deg.
Technical Data
| Brand | FESTO |
|---|---|
| Model | DSM-8-90-P-A |
| Part number | 173197 |
| Product type | Semi-Rotary Drive |
| Size | 8 |
| Cushioning angle | 0.5 deg |
| Swivel angle | 0 deg … 90 deg |
| Permissible stop radius | ≥10 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Vane |
| Position detection | Via proximity switch |
| Operating pressure | 0.35 MPa … 0.8 MPa |
| Operating pressure | 3.5 bar … 8 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 3 Hz |
| Repetition accuracy | 1 deg |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Ambient temperature | 0 °C … 60 °C |
| Max. stop force | 30 N |
| Max. axial force | 10 N |
| Max. radial force | 20 N |
| Theoretical torque at 0.6 MPa (6 bar, 87 psi) | 0.35 Nm |
| Permissible mass moment of inertia | 0.0013 kgm² |
| Product weight | 85 g |
| Type of mounting | With female thread |
| Pneumatic connection | M3 |
| Material drive shaft | High-alloy stainless steel |
| Material seals | TPE-U(PU) |
| Material housing | anodised |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model DSM-8-90-P-A, part number 173197, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies DSM-8-90-P-A as a semi-rotary drive under part number 173197. It lists size as 8. Confirm the full variant before ordering.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | DSM-8-90-P-A |
| Part number | 173197 |
| Product type | Semi-Rotary Drive |
| Size | 8 |
| Cushioning angle | 0.5 deg |
| Swivel angle | 0 deg … 90 deg |
| Permissible stop radius | ≥10 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Vane |






