FESTO DZF-32-15-P-A 164036 Flat Cylinder

The FESTO DZF-32-15-P-A, part number 164036, is a flat cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: DZF-32-15-P-A Category: Tags: , , Brand:

Description

FESTO DZF-32-15-P-A 164036 Flat Cylinder

The FESTO DZF-32-15-P-A, part number 164036, is a flat cylinder. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Piston diameter: 32 mm Equivalent diameter.
  • Piston rod thread: M6.
  • Torsional backlash at piston rod +/-: 0.8 deg.

Technical Data

Brand FESTO
Model DZF-32-15-P-A
Part number 164036
Product type Flat Cylinder
Piston diameter 32 mm Equivalent diameter
Piston rod thread M6
Torsional backlash at piston rod +/- 0.8 deg
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Mode of operation Double-acting
Design Piston Piston rod
Position detection Via proximity switch
Protection against torque/guide Oval piston
Operating pressure 0.1 MPa … 1 MPa
Operating pressure 1 bar … 10 bar
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC 2 – Moderate corrosion stress
Ambient temperature -20 °C … 80 °C
Impact energy in end positions 0.4 J
Max. torque for protection against torsion 0.8 Nm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke 415 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke 483 N
Moving mass for 0 mm stroke 65 g
Additional moving mass per 10 mm stroke 9 g
Additional weight per 10 mm stroke 24 g
Basic weight for 0 mm stroke 272 g
Type of mounting With female thread With accessories
Pneumatic connection G1/8
Material cover Die-cast aluminium
Material seals HNBR TPE-U(PU)
Material housing Anodised wrought aluminium alloy
Material piston seal NBR
Material piston rod High-alloy steel

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model DZF-32-15-P-A, part number 164036, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies DZF-32-15-P-A as a flat cylinder under part number 164036. It lists piston diameter as 32 mm Equivalent diameter. Confirm the full variant before ordering.

Operating Conditions Check

Before selecting DZF-32-15-P-A, confirm that the actual operating conditions fall within the specifications for the exact version being ordered. Relevant factors may include supply voltage, pressure, temperature, medium, and operating frequency, depending on the product type. Do not apply a series-wide maximum rating to an individual variant without checking its documentation.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

DZF-32-15-P-A

Part number

164036

Product type

Flat Cylinder

Piston diameter

32 mm Equivalent diameter

Piston rod thread

M6

Torsional backlash at piston rod +/-

0.8 deg

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Mode of operation

Double-acting

Design

Piston Piston rod

Position detection

Via proximity switch