FESTO ESS-40-CS 189405 Suction Cup With Connection
The FESTO ESS-40-CS, part number 189405, is a suction cup with connection. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO ESS-40-CS 189405 Suction Cup With Connection
The FESTO ESS-40-CS, part number 189405, is a suction cup with connection. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Height compensator for suction cup: 12.8 mm.
- Min. workpiece radius: 100 mm.
- Nominal size: 3 mm.
Technical Data
| Brand | FESTO |
|---|---|
| Model | ESS-40-CS |
| Part number | 189405 |
| Product type | Suction Cup With Connection |
| Height compensator for suction cup | 12.8 mm |
| Min. workpiece radius | 100 mm |
| Nominal size | 3 mm |
| Suction cup diameter | 40 mm |
| Suction cup volume | 19.72 cm³ |
| Position of connection | On top |
| Mounting position | Any |
| Correlation to suction-cup holder | Size 4 |
| Suction cup shape | Round protective bellows 3.5-fold |
| Operating pressure | -0.095 MPa … 0 MPa |
| Operating pressure | -0.95 bar … 0 bar |
| Operating pressure | -13.775 psi … 0 psi |
| Nominal operating pressure | -0.07 MPa |
| Nominal operating pressure | -0.7 bar |
| Nominal operating pressure | -10.15 psi |
| Operating medium | Atmospheric air based on ISO 8573-1:2010 [7:-:-] |
| Corrosion resistance class CRC | 1 – Low corrosion stress |
| Suitable for use with food | See supplementary material information |
| Ambient temperature | -30 °C … 180 °C |
| Holding force at nominal operating pressure | 42.4 N |
| Lateral force at nominal operating pressure | 13 N |
| Product weight | 21.9 g |
| Type of mounting | Via vacuum port |
| Vacuum connection | M6 |
| Colour | Transparent |
| Shore hardness | 50 +/-5 |
| Material screwed plug | Nickel-plated wrought aluminium alloy Nickel-plated brass Steel, galvanised and chrome-plated |
| Material suction cup | VMQ (silicone) |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model ESS-40-CS, part number 189405, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies ESS-40-CS as a suction cup with connection under part number 189405. It lists height compensator for suction cup as 12.8 mm. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | ESS-40-CS |
| Part number | 189405 |
| Product type | Suction Cup With Connection |
| Height compensator for suction cup | 12.8 mm |
| Min. workpiece radius | 100 mm |
| Nominal size | 3 mm |
| Suction cup diameter | 40 mm |
| Suction cup volume | 19.72 cm³ |
| Position of connection | On top |
| Mounting position | Any |
| Correlation to suction-cup holder | Size 4 |







