FESTO SDBT-MSB-1L-ZU-K-2-LE 8150173 Proximity Switch

The FESTO SDBT-MSB-1L-ZU-K-2-LE, part number 8150173, is a proximity switch. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

SKU: SDBT-MSB-1L-ZU-K-2-LE Category: Tags: , , Brand:

Description

FESTO SDBT-MSB-1L-ZU-K-2-LE 8150173 Proximity Switch

The FESTO SDBT-MSB-1L-ZU-K-2-LE, part number 8150173, is a proximity switch. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.

Key Features

  • Design: For T-slot.
  • Special characteristics: Oil-resistant.
  • Measured variable: Position.

Technical Data

Brand FESTO
Model SDBT-MSB-1L-ZU-K-2-LE
Part number 8150173
Product type Proximity Switch
Design For T-slot
Special characteristics Oil-resistant
Measured variable Position
Measuring principle Magneto-resistive
Ambient temperature -20 °C … 70 °C
Repetition accuracy 0.2 mm
Switching output Contactless, 2-wire
Switching element function N/O contact
Switch-on time ≤2.5 ms
Switch-off time ≤2.5 ms
Max. switching frequency 480 Hz
Max. output current 50 mA
Max. switching capacity DC 1.4 W
Voltage drop ≤2.8 V
Short circuit current rating No
Overload protection No
Rated operational voltage DC 24 V
Operational voltage range DC 10 V … 28 V
Reverse polarity protection No
Electrical connection 1, connection type Cable
Electrical connection 1, connector system Open end
Electrical connection 1, number of connections/cores 2
Connection outlet orientation In-line
Material screw-type lock High-alloy stainless steel
Cable length 2 m
Cable characteristic Standard Suitable for energy chains
Material cable sheath PUR
Material insulating sheath PP
Wire ends Cut off bluntly
Type of mounting Screw-clamped Insertable in the slot from above
Max. tightening torque 0.3 Nm
Mounting position Any
Product weight 24 g
Material housing Makrolon®
Switching status indication Yellow LED
Ambient temperature with moving cable -20 °C … 70 °C
Degree of protection IP67 IP68 To IEC 60529

Application Notes

Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.

Selection and Installation

Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.

Inquiry

For a quotation, provide model SDBT-MSB-1L-ZU-K-2-LE, part number 8150173, required quantity and destination.

Exact-Model Datasheet Check

The supplied Festo datasheet identifies SDBT-MSB-1L-ZU-K-2-LE as a proximity switch under part number 8150173. It lists design as For T-slot. Confirm the full variant before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

SDBT-MSB-1L-ZU-K-2-LE

Part number

8150173

Product type

Proximity Switch

Design

For T-slot

Special characteristics

Oil-resistant

Measured variable

Position

Measuring principle

Magneto-resistive

Ambient temperature

-20 °C … 70 °C

Repetition accuracy

0.2 mm

Switching output

Contactless, 2-wire

Switching element function

N/O contact