FESTO SMT-10M-PS-24V-E-0,3-L-M8D 551375 Proximity Sensor
The FESTO SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SMT-10M-PS-24V-E-0,3-L-M8D 551375 Proximity Sensor
The FESTO SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Design: For C-slot.
- Special characteristics: Oil-resistant.
- Measured variable: Position.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SMT-10M-PS-24V-E-0,3-L-M8D |
| Part number | 551375 |
| Product type | Proximity Sensor |
| Design | For C-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 70 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |
| Switch-on time | ≤1.3 ms |
| Switch-off time | 4.2 ms … 7.3 ms |
| Max. switching frequency | 130 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 50 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 1.5 W |
| Voltage drop | ≤1.7 V |
| Off-state current | <0.05 mA |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 5 V … 30 V |
| Residual ripple | 10% |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable with plug |
| Electrical connection 1, connector system | M8x1, A-coded, to EN 61076-2-104 |
| Electrical connection 1, number of connections/cores | 3 |
| Electrical connection 1, type of mounting | Screw-type lock Rotatable |
| Electrical connection 1, compatible type of mounting | Compatible with rotatable/non-rotatable screw-type lock |
| Electrical connection 1, connection pattern | 00991155 |
| Connection outlet orientation | In-line |
| Material electrical contact | Gold-plated brass |
| Material connector housing | TPE-U(PU) |
| Material screw-type lock | Brass, nickel-plated |
| Test conditions cable | Bending strength: to Festo standard Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 0.3 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.4 Nm |
| Mounting position | Any |
| Product weight | 6.7 g |
| Housing colour | Black |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Ambient temperature with moving cable | -20 °C … 70 °C |
| Degree of protection | IP65 IP68 |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SMT-10M-PS-24V-E-0,3-L-M8D, part number 551375, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SMT-10M-PS-24V-E-0,3-L-M8D as a proximity sensor under part number 551375. It lists design as For C-slot. Confirm the full variant before ordering.
Installation Preparation
Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | SMT-10M-PS-24V-E-0,3-L-M8D |
| Part number | 551375 |
| Product type | Proximity Sensor |
| Design | For C-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 70 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |







