FESTO SMT-8M-A-PS-24V-E-5,0-OE 574336 Proximity Sensor
The FESTO SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Description
FESTO SMT-8M-A-PS-24V-E-5,0-OE 574336 Proximity Sensor
The FESTO SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, is a proximity sensor. The supplied Festo datasheet confirms this product identity and lists its model-specific technical data below.
Key Features
- Design: For T-slot.
- Special characteristics: Oil-resistant.
- Measured variable: Position.
Technical Data
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-5,0-OE |
| Part number | 574336 |
| Product type | Proximity Sensor |
| Design | For T-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |
| Switch-on time | ≤1.3 ms |
| Switch-off time | ≤7.3 ms |
| Max. switching frequency | 130 Hz |
| Max. output current | 100 mA |
| Max. output current using mounting kits | 100 mA |
| Max. switching capacity DC | 2.8 W |
| Max. switching capacity DC using mounting kits | 2.8 W |
| Voltage drop | <1.5 V |
| Short circuit current rating | Yes |
| Overload protection | Yes |
| Rated operational voltage DC | 24 V |
| Operational voltage range DC | 5 V … 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Cable |
| Electrical connection 1, connector system | Open end |
| Electrical connection 1, number of connections/cores | 3 |
| Connection outlet orientation | In-line |
| Test conditions cable | Test conditions on request Torsional strength: > 300,000 cycles, ±270°/0.1 m Flexural strength: >50000 cycles, bending radius 5 mm Energy chain: > 5 million cycles, bending radius 28 mm |
| Cable length | 5 m |
| Cable characteristic | Suitable for energy chains/robot applications |
| Cable sheath colour | Grey |
| Material cable sheath | TPE-U(PUR) |
| Material insulating sheath | PP |
| Wire ends | Wire ferrule |
| Type of mounting | Screw-clamped Insertable in the slot from above |
| Max. tightening torque | 0.6 Nm |
| Mounting position | Any |
| Product weight | 57.1 g |
| Housing colour | Black |
| Material housing | Reinforced PA High-alloy stainless steel |
| Switching status indication | Yellow LED |
| Function reserve indication | Orange LED |
| Ambient temperature with moving cable | -20 °C … 85 °C |
| Degree of protection | IP65 IP68 IP69K |
Application Notes
Confirm the complete model and part number against the existing equipment. Products in the same Festo series may have different dimensions, connections and operating configurations.
Selection and Installation
Check the equipment documentation and the applicable Festo installation instructions before replacement or commissioning.
Inquiry
For a quotation, provide model SMT-8M-A-PS-24V-E-5,0-OE, part number 574336, required quantity and destination.
Exact-Model Datasheet Check
The supplied Festo datasheet identifies SMT-8M-A-PS-24V-E-5,0-OE as a proximity sensor under part number 574336. It lists design as For T-slot. Confirm the full variant before ordering.
Maintenance Inspection
Before replacing SMT-8M-A-PS-24V-E-5,0-OE, examine the existing installation for issues that may affect the new part. Check the original label, ports, seals, fittings, cables, and mounting points as applicable. Finding a leak, worn connection, or loose contact before installation can help avoid repeating the same problem after replacement.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | SMT-8M-A-PS-24V-E-5,0-OE |
| Part number | 574336 |
| Product type | Proximity Sensor |
| Design | For T-slot |
| Special characteristics | Oil-resistant |
| Measured variable | Position |
| Measuring principle | Magneto-resistive |
| Ambient temperature | -40 °C … 85 °C |
| Repetition accuracy | 0.2 mm |
| Switching output | PNP |
| Switching element function | N/O contact |






