FESTO VEAB-L-26-D12-Q4-V1-1R1 8046301 Proportional-Pressure Regulator
The Festo VEAB-L-26-D12-Q4-V1-1R1 (part number 8046301) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as QS-4.
Description
FESTO VEAB-L-26-D12-Q4-V1-1R1 8046301 Proportional-Pressure Regulator
The Festo VEAB-L-26-D12-Q4-V1-1R1 (part number 8046301) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and pneumatic connection, port 1 as QS-4.
Key Features
- Valve function: 3-way proportional pressure regulator
- Pneumatic connection, port 1: QS-4
- Pneumatic connection, port 2: QS-4
- Pneumatic connection, port 3: QS-4
Technical Data
| Brand | FESTO |
|---|---|
| Model | VEAB-L-26-D12-Q4-V1-1R1 |
| Part number | 8046301 |
| Valve function | 3-way proportional pressure regulator |
| Type of piloting | Direct |
| Type of reset | Mechanical spring |
| Type of actuation | Electrical |
| Mounting position | Any |
| Sealing principle | Soft |
| Total leakage | 1 l/h |
| Ambient temperature | 0 °C … 50 °C |
| Media temperature | 5 °C … 50 °C |
| Storage temperature | -20 °C … 70 °C |
| Dimensions (W x L x H) | 18 mm x 60.5 mm x 85 mm |
| Pneumatic connection, port 1 | QS-4 |
| Pneumatic connection, port 2 | QS-4 |
| Pneumatic connection, port 3 | QS-4 |
| Material seals | NBR |
| Type of mounting | With through-hole With accessories |
| Inlet pressure 1 | 0 MPa … 0.1 MPa |
| Inlet pressure 1 | 0 bar … 1 bar |
| Inlet pressure 1 | 0 psi … 14.5 psi |
| Output pressure 2 | 1.0E-4 MPa … 0.02 MPa |
| Output pressure 2 | 0.001 bar … 0.2 bar |
| Output pressure 2 | 0.0145 psi … 2.9 psi |
| Standard nominal flow rate (standardised to DIN 1343) | ≥5 l/min |
| Standard nominal flow rate 2-3 | ≥4 l/min |
| Linearity | 0.8 %FS |
| Reproducibility | 0.4 %FS |
| Hysteresis | 0.5 %FS |
| Temperature cooefficient | 0.05 %/K |
| Total accuracy | 0.8 %FS |
| Product weight | 70 g |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] Inert gas |
| Note on operating and pilot medium | Lubricated operation not possible |
| Degree of protection | IP65 |
| KC mark | KC-EMV |
| Note on materials | RoHS compliant |
| Corrosion resistance class CRC | 2 – Moderate corrosion stress |
| Operational voltage range DC | 19 V … 29 V |
| Nominal operating voltage DC | 24 V |
| Residual ripple | 10% |
| Setpoint value | 0 – 10 V |
| Signal range analogue output | 0 – 10 V |
| Accuracy analogue output in ± %FS | 2 %FS |
| Max. electrical power consumption | 1 W |
| Reverse polarity protection | For all electrical connections |
| Short circuit current rating | For all electrical connections |
| Safety instructions | Safety position VEAA/VEAB: if the electrical power supply fails, the output pressure is maintained unregulated and may rise or fall – valve blocked. |
| Electrical connection | M8x1 Plug To EN 60947-5-2 |
| Material housing | Reinforced PA |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model VEAB-L-26-D12-Q4-V1-1R1, part number 8046301, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists pneumatic connection, port 2 as QS-4 for part number 8046301. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Application Review
When considering this proportional-pressure regulator for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Brand | FESTO |
|---|---|
| Model | VEAB-L-26-D12-Q4-V1-1R1 |
| Part Number | 8046301 |
| Valve function | 3-way proportional pressure regulator |
| Type of piloting | Direct |
| Type of reset | Mechanical spring |
| Type of actuation | Electrical |
| Mounting position | Any |
| Sealing principle | Soft |
| Total leakage | 1 l/h |
| Ambient temperature | 0 °C … 50 °C |







