FESTO VPPM-6L-L-1-G18-0L2H-LK-S1 8024258 Proportional-Pressure Regulator

The Festo VPPM-6L-L-1-G18-0L2H-LK-S1 (part number 8024258) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and standard nominal flow rate (standardised to din 1343) as 380 l/min.

SKU: 8024258 Category: Tags: , , Brand:

Description

FESTO VPPM-6L-L-1-G18-0L2H-LK-S1 8024258 Proportional-Pressure Regulator

The Festo VPPM-6L-L-1-G18-0L2H-LK-S1 (part number 8024258) is a proportional-pressure regulator. Its product datasheet lists valve function as 3-way proportional pressure regulator and standard nominal flow rate (standardised to din 1343) as 380 l/min.

Key Features

  • Valve function: 3-way proportional pressure regulator
  • Standard nominal flow rate (standardised to DIN 1343): 380 l/min
  • Pneumatic connection, port 1: G1/8
  • Pneumatic connection, port 2: G1/8

Technical Data

Brand FESTO
Model VPPM-6L-L-1-G18-0L2H-LK-S1
Part number 8024258
Nominal size, supply 6 mm
Nominal size, exhaust 4.5 mm
Type of actuation Electrical
Sealing principle Soft
Mounting position Any
Design Piloted diaphragm regulator
Short circuit current rating For all electrical connections
Safety instructions Safety position VPPM: if the power supply cable is interrupted, output
pressure is maintained unregulated.
Reverse polarity protection For all electrical connections
Type of reset Mechanical spring
Type of piloting Piloted
Valve function 3-way proportional pressure regulator
Display type LED
Pressure regulation range 0.002 MPa … 0.2 MPa
Pressure regulation range 0.02 bar … 2 bar
Inlet pressure 1 0 bar … 4 bar
Inlet pressure 1 0 MPa … 0.4 MPa
Max. pressure hysteresis 0.01 bar
Standard nominal flow rate (standardised to DIN 1343) 380 l/min
Operational voltage range DC 18 V … 30 V
Max. current consumption 300 mA
Duty cycle 100%
Max. electrical power consumption 7 W
Protocol I-Port
IO-Link®
Residual ripple 10%
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Inert gas
Note on operating and pilot medium Lubricated operation not possible
KC mark KC-EMV
Corrosion resistance class CRC 2 – Moderate corrosion stress
Media temperature 10 °C … 50 °C
Degree of protection IP65
Ambient temperature 0 °C … 60 °C
Product weight 400 g
Linearity 1 %FS
Hysteresis 0.5 %FS
Reproducibility 0.5 %FS
Total accuracy 1.25 %FS
Temperature cooefficient 0.04 %/K
Repetition accuracy FS 0.5 %
IO-Link, Protocol version Device V 1.1
IO-Link, communication mode COM1 (4.8 kB), COM2 (38.4 kB), COM3 (230.4 kB)
IO-Link, Port class A
Type of mounting Either:
With through-hole
With accessories
Pneumatic connection, port 1 G1/8
Pneumatic connection, port 2 G1/8
Pneumatic connection, port 3 G1/8
Note on materials RoHS compliant
Material housing Wrought aluminium alloy
anodised

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model VPPM-6L-L-1-G18-0L2H-LK-S1, part number 8024258, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists pneumatic connection, port 1 as G1/8 for part number 8024258. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Installation Preparation

Prepare the equipment according to the site procedure and the manufacturer's instructions before installing this part. Where relevant, isolate power and pressure sources, then check the mounting direction, connection points, and sealing arrangement. After installation, inspect the completed connections before beginning a controlled functional test.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Brand

FESTO

Model

VPPM-6L-L-1-G18-0L2H-LK-S1

Part Number

8024258

Nominal size, supply

6 mm

Nominal size, exhaust

4.5 mm

Type of actuation

Electrical

Sealing principle

Soft

Mounting position

Any

Design

Piloted diaphragm regulator

Short circuit current rating

For all electrical connections

Safety instructions

Safety position VPPM: if the power supply cable is interrupted, output pressure is maintained unregulated.