IMI Norgren 18-001-979 F68G Filter Mounting Bracket (Ported Yoke)

Norgren 18-001-979 is a ported yoke for 1/2, 3/4 and 1 inch ports, used for F68G filter mounting in Excelon assemblies.

Request a Quote

SKU: 18-001-979 Category: Tags: , Brand:

Description

The 18-001-979 is a ported yoke used to mount F68G filters in Excelon air-preparation assemblies. The Norgren catalogue lists this yoke for 1/2, 3/4 and 1 inch ports, and the assembly can be combined with a Quikclamp for modular installation.

Request a Quote

Key Features

  • Ported yoke for F68G filter mounting
  • Listed for 1/2, 3/4 and 1 in ports
  • Compatible with Excelon modular assembly
  • Quikclamp accessory available for modular installation
  • Maximum pressure 17 bar (250 psig) in the Quikclamp series

Technical Data

Model 18-001-979
Type Ported yoke / mounting bracket
Ports 1/2, 3/4, 1 in (listed)
Use F68G filter mounting
Quikclamp max pressure 17 bar (250 psig)
Quikclamp max temperature 65 C (150 F)

Selection Notes

This yoke is a structural accessory; the pressure and temperature figures shown belong to the Quikclamp system, not to the yoke alone. Confirm the port size and the filter series before assembly, and tighten the Quikclamp screw with the specified 3 mm hex or T15 Torx wrench.

Excelon ported yoke sizes

Port size Yoke model
1/2 in 18-001-979
3/4 in 18-001-979
1 in 18-001-979
1-1/4 in 18-001-978

Ported yoke in the assembly

The catalogue table lists the same 18-001-979 yoke against the 1/2, 3/4 and 1 inch port sizes, with a separate 18-001-978 for 1-1/4 inch. This means the yoke model does not by itself identify the port size; the mating filter and the assembly drawing must be checked.

Quikclamp installation notes

The Quikclamp clamps the flanges of adjacent products with two face-sealing o-rings and a captive screw, adding about 6.5 mm to the overall assembly length. Tighten the screw with a 3 mm hex or T15 Torx wrench and check the o-rings before closing the clamp.

Replacement Compatibility

Before ordering IMI Norgren 18-001-979 F68G Filter Mounting Bracket (Ported Yoke) as a replacement, compare the complete model code with the part currently installed. Check the connection style, mounting dimensions, electrical rating, and any series-specific suffixes. Parts that look alike may operate differently, so confirm the relevant specifications against the equipment requirements before treating them as interchangeable.

International Delivery Options

We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.

Additional information

Model

18-001-979

Type

Ported yoke / mounting bracket

Ports

1/2, 3/4, 1 in (listed)

Use

F68G filter mounting

Quikclamp max pressure

17 bar (250 psig)

Quikclamp max temperature

65 C (150 F)