Norgren 20AG-X8G-PH100 20AG G1 High Flow Pressure Regulator

20AG-X8G-PH100: G1 high flow pressure regulator with T-bar adjustment, relieving diaphragm and 28 bar maximum inlet pressure.

Request a Quote

SKU: 20AG-X8G-PH100 Category: Tags: , Brand:

Description

The 20AG-X8G-PH100 uses a large diaphragm and balanced valve to regulate general purpose compressed air supplies as flow demand changes. Its G1 ports support high flow circuits, while the balanced valve reduces the influence of inlet pressure variation on the outlet setting.

Request a Quote

Selection Notes for 20AG-X8G-PH100

Use for compressed air only. Size the regulator for the required flow and allowable pressure droop, and provide access to the T-bar and the 1/8 ISO Rc gauge connection.

Regulating configuration and capacity

Parameter Value
Main ports G1
Outlet adjustment range 0.3-8.5 bar (5-125 psig)
Maximum inlet pressure 28 bar (406 psi)
Typical flow 100 dm3/s (200 scfm)
Flow reference conditions 7 bar inlet; 4 bar set pressure; 1 bar droop
Adjustment T-bar
Diaphragm Relieving
Weight 2.90 kg

Materials and working conditions

Parameter Value
Medium Compressed air only
Ambient and media temperature -34 to +80 C
Gauge port 1/8 ISO Rc
Body Zinc alloy
Bonnet Aluminium alloy
Bottom plug Aluminium
Adjusting screw Plated steel
Elastomers Synthetic rubber

Standard installation dimensions

Parameter Value
Overall height 232 mm
Body width 124 mm
Port center above base 41 mm
T-bar width 64 mm
Adjustment hexagon 19 mm
Bracket slot center distance 98 mm

Response to changing demand

A large diaphragm provides a quick response to changing flow demand and line pressure. The balanced valve minimizes the effect of changing inlet pressure on the regulated outlet, making the regulator suitable for general purpose high flow pneumatic supplies.

Flow sizing conditions

Typical flow is 100 dm3/s at 7 bar inlet pressure, 4 bar outlet set pressure and 1 bar droop from the setting. This is a reference operating point rather than a constant flow rating across all inlet and outlet pressures.

Materials and low temperature service

The zinc alloy body, aluminium alloy bonnet and synthetic rubber elastomers operate with compressed air from -34 to +80 C. Below +2 C, supply air must be dry enough to prevent ice formation. A separate gauge can be connected to the 1/8 ISO Rc gauge port.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Model

20AG-X8G-PH100

Port size

G1

Outlet adjustment range

0.3-8.5 bar

Maximum inlet pressure

28 bar

Adjustment

T-bar

Relief

Relieving