IMI Norgren B73G-4AK-QD1-RMN 1/2PTF Filter Regulator
B73G-4AK-QD1-RMN: 1/2 PTF, manual quarter-turn drain, metal level bowl, 5 micron, no gauge, relieving outlet 0.3-10 bar, inlet max 17 bar, up to 80 C. Confirm the full code, interface and operating limits before replacement.
Description
IMI Norgren B73G-4AK-QD1-RMN 1/2PTF Filter Regulator is a Norgren filter regulator. Its verified configuration is 1/2 PTF, manual quarter-turn drain, metal level bowl, 5 micron, no gauge, relieving outlet 0.3-10 bar, inlet max 17 bar, up to 80 C. Match the complete code and connection with the installed equipment before ordering.
Confirm the complete model code B73G-4AK-QD1-RMN against the component marking and circuit requirements.
Record the full model marking and check the mating interface, available space and operating conditions during maintenance. Follow the machine manufacturer’s isolation and commissioning procedure before returning the circuit to service.
Model-specific verified configuration
| Specification | Value |
|---|---|
| Complete model code | B73G-4AK-QD1-RMN |
| Operating limits | 1/2 PTF, manual quarter-turn drain, metal level bowl, 5 micron, no gauge, relieving outlet 0.3-10 bar, inlet max 17 bar, up to 80 C |
Port, drain and bowl selection
Confirm the complete model code B73G-4AK-QD1-RMN against the component marking and circuit requirements.
Inlet versus outlet limit
The operating limits for B73G-4AK-QD1-RMN are 1/2 PTF, manual quarter-turn drain, metal level bowl, 5 micron, no gauge, relieving outlet 0.3-10 bar, inlet max 17 bar, up to 80 C. Apply the published values only to this complete configuration and confirm the actual supply, temperature and medium at the point of use.
Service and setup checks
Before ordering B73G-4AK-QD1-RMN, compare the exact marking, connection and physical option shown with the installed equipment. A shared series or similar appearance does not confirm compatibility.
Functional Check After Replacement
After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.
Product Inquiry Support
We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.
Additional information
| Model | B73G-4AK-QD1-RMN |
|---|---|
| Operating limits | 1/2 PTF, manual quarter-turn drain, metal level bowl, 5 micron, no gauge, relieving outlet 0.3-10 bar, inlet max 17 bar, up to 80 C |








