FESTO DAPS-0015-090-R-F03 533417 Quarter Turn Actuator
The Festo DAPS-0015-090-R-F03 is a double-acting quarter-turn actuator with a 90° swivel angle. Its datasheet specifies an F03 flange pattern, 1 to 8.4 bar operating pressure and G1/8 pneumatic connection.
Description
FESTO DAPS-0015-090-R-F03 533417 Quarter Turn Actuator
The Festo DAPS-0015-090-R-F03 is a double-acting quarter-turn actuator with a 90° swivel angle. Its datasheet specifies an F03 flange pattern, 1 to 8.4 bar operating pressure and G1/8 pneumatic connection.
Key Features
- Double-acting 90° quarter-turn operation
- F03 flange hole pattern
- 1 to 8.4 bar operating pressure
- G1/8 pneumatic connection
Technical Data
| Brand | FESTO |
|---|---|
| Model | DAPS-0015-090-R-F03 |
| Part number | 533417 |
| Size of valve actuator | 0015 |
| Flange hole pattern | F03 |
| Swivel angle | 90 deg |
| End-position adjustment range at 0° | -1 deg … 9 deg |
| Shaft connection depth | 13.2 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Mounting position | Any |
| Mode of operation | Double-acting |
| Design | Scotch yoke system |
| Position detection | None |
| Closing direction | Closes to the right |
| Symbol | 00991265 |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Operating pressure | 0.1 MPa … 0.84 MPa |
| Operating pressure | 1 bar … 8.4 bar |
| Nominal operating pressure | 0.56 MPa |
| Nominal operating pressure | 5.6 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 1 Hz |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 – high corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 15 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 7.5 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 11.3 Nm |
| Note on torque | The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 0.56 l |
| Product weight | 750 g |
| Shaft connection | T11 |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS compliant |
| Material cover | Wrought aluminium alloy |
| Material seals | Fluoro rubber NBR PUR |
| Material housing | Wrought aluminium alloy |
| Material screws | High-alloy steel |
| Material shaft | High-alloy steel |
| Material number shaft | 1,4305 |
Application Notes
Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.
Selection and Installation
Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.
Inquiry
For a quotation or replacement enquiry, provide model DAPS-0015-090-R-F03, part number 533417, quantity, destination and clear photos of the original unit when available.
Torque and Flange Matching
At the nominal operating pressure, Festo lists torque values of 15 Nm at 0°, 7.5 Nm at 50° and 11.3 Nm at 90°. Confirm that the actuator torque and F03 flange arrangement suit the valve and coupling.
Delivery Inspection
Check the product when it arrives and before it is fitted to the machine. Verify the marking against the order, and inspect the visible condition, interfaces, mounting features, and supplied accessories. If the model or physical condition does not match expectations, clarify the discrepancy before installation.
Order Detail Confirmation
To help prepare an accurate spare-parts order, please include the full model code, required quantity, and delivery destination in your enquiry. Photos or existing purchase records may be useful when a suffix or replacement choice is uncertain. Product details, payment method, and shipping arrangement can then be reviewed together before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DAPS-0015-090-R-F03 |
| Part Number | 533417 |
| Size of valve actuator | 0015 |
| Flange hole pattern | F03 |
| Swivel angle | 90 deg |
| End-position adjustment range at 0° | -1 deg … 9 deg |
| Shaft connection depth | 13.2 mm |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Mounting position | Any |









