FESTO DAPS-0015-090-RS4-F04 533483 Quarter Turn Actuator
The Festo DAPS-0015-090-RS4-F04 is a single-acting quarter-turn actuator with a 90° swivel angle and F04 flange pattern. The datasheet specifies a 5.6 to 8.4 bar operating-pressure range.
Description
FESTO DAPS-0015-090-RS4-F04 533483 Quarter Turn Actuator
The Festo DAPS-0015-090-RS4-F04 is a single-acting quarter-turn actuator with a 90° swivel angle and F04 flange pattern. The datasheet specifies a 5.6 to 8.4 bar operating-pressure range.
Key Features
- Single-acting 90° quarter-turn operation
- F04 flange hole pattern
- 5.6 to 8.4 bar operating pressure
- Spring-return torque specified in the datasheet
Technical Data
| Brand | FESTO |
|---|---|
| Model | DAPS-0015-090-RS4-F04 |
| Part number | 533483 |
| Size of valve actuator | 0015 |
| Flange hole pattern | F04 |
| Swivel angle | 90 deg |
| End-position adjustment range at 0° | -1 deg … 9 deg |
| End-position adjustment range at nominal swivel angle | 81 deg … 91 deg |
| Shaft connection depth | 13.2 mm |
| Note on end-position adjusting range | One end position optionally adjustable |
| Fitting connection conforms to standard | ISO 5211 |
| Cushioning | No cushioning |
| Mounting position | Any |
| Mode of operation | Single-acting |
| Design | Scotch yoke system |
| Position detection | None |
| Closing direction | Closes to the right |
| Symbol | 00991266 |
| Valve connection conforms to standard | VDI/VDE 3845 (NAMUR) |
| Supply pressure for spring strength | 0.56 MPa |
| Supply pressure for spring strength | 5.6 bar |
| Operating pressure | 0.56 MPa … 0.84 MPa |
| Operating pressure | 5.6 bar … 8.4 bar |
| Nominal operating pressure | 0.56 MPa |
| Nominal operating pressure | 5.6 bar |
| Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) | 1 Hz |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 3 – high corrosion stress |
| Ambient temperature | -20 °C … 80 °C |
| Torque at nominal operating pressure and 0° swivel angle | 15 Nm |
| Torque at nominal operating pressure and 50° swivel angle | 7.5 Nm |
| Torque at nominal operating pressure and 90° swivel angle | 10 Nm |
| Note on torque | The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. |
| Spring return torque at 0° swivel angle | 10 Nm |
| Spring return torque at 50° swivel angle | 7.5 Nm |
| Spring return torque at 90° swivel angle | 15 Nm |
| Spring strength | 4 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° | 0.63 l |
| Product weight | 1200 g |
| Shaft connection | T11 |
| Pneumatic connection | G1/8 |
Application Notes
Confirm the complete model code, the installed mechanical or electrical interface and the operating limits against the original equipment. Similar products within a series can differ in pressure, supply, output, mounting or communication.
Selection and Installation
Compare the original nameplate, the part number and the product-specific datasheet. Follow Festo and machine manufacturer instructions for mounting, connections and controlled commissioning. Clarify any uncertain option or suffix before ordering.
Inquiry
For a quotation or replacement enquiry, provide model DAPS-0015-090-RS4-F04, part number 533483, quantity, destination and clear photos of the original unit when available.
Spring Return Torque
Festo lists spring-return torque values of 10 Nm at 0°, 7.5 Nm at 50° and 15 Nm at 90° for this RS4 version. Check the valve duty and F04 mounting interface before replacement.
Application Review
When considering this quarter turn actuator for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
Payment Arrangements
The payment method is confirmed as part of the order arrangement. International orders may be settled in USD by T/T, PayPal, or another mutually agreed method. For payments in RMB within mainland China, Alipay QR code and WeChat Pay QR code arrangements are also available. The applicable option is agreed before order processing.
Additional information
| Brand | FESTO |
|---|---|
| Model | DAPS-0015-090-RS4-F04 |
| Part Number | 533483 |
| Size of valve actuator | 0015 |
| Flange hole pattern | F04 |
| Swivel angle | 90 deg |
| End-position adjustment range at 0° | -1 deg … 9 deg |
| End-position adjustment range at nominal swivel angle | 81 deg … 91 deg |
| Shaft connection depth | 13.2 mm |
| Note on end-position adjusting range | One end position optionally adjustable |
| Fitting connection conforms to standard | ISO 5211 |









