FESTO DSM-12-270-P-A-B 547570 Semi-Rotary Drive

The Festo DSM-12-270-P-A-B (part number 547570) is a semi-rotary drive. Its product datasheet lists size as 12 and rotation angle adjustment range as 0 deg … 270 deg.

SKU: 547570 Category: Tags: , , Brand:

Description

FESTO DSM-12-270-P-A-B 547570 Semi-Rotary Drive

The Festo DSM-12-270-P-A-B (part number 547570) is a semi-rotary drive. Its product datasheet lists size as 12 and rotation angle adjustment range as 0 deg … 270 deg.

Key Features

  • Size: 12
  • Rotation angle adjustment range: 0 deg … 270 deg
  • Swivel angle: 0 deg … 270 deg
  • Mode of operation: Double-acting

Technical Data

Brand FESTO
Model DSM-12-270-P-A-B
Part number 547570
Size 12
Cushioning angle 1.8 deg
Rotation angle adjustment range 0 deg … 270 deg
Swivel angle 0 deg … 270 deg
Permissible stop radius ≥15 mm
Cushioning Elastic cushioning rings/plates at both ends
Mounting position Any
Fine adjustment -6 deg
Mode of operation Double-acting
Design Vane
Position detection Via proximity switch
Operating pressure 0.2 MPa … 1 MPa
Operating pressure 2 bar … 10 bar
Max. swivel frequency at 0.6 MPa (6 bar, 87 psi) 2 Hz
Repetition accuracy 1 deg
Operating medium Compressed air to ISO 8573-1:2010 [7:-:-]
Note on operating and pilot medium Lubricated operation possible (in which case lubricated operation will
always be required)
Corrosion resistance class CRC 0 – No corrosion stress
Cleanroom suitability, measured according to ISO 14644-14 Class 6 according to ISO 14644-1
Ambient temperature -10 °C … 60 °C
Max. stop force 90 N
Max. axial force 18 N
Max. radial force 45 N
Theoretical torque at 0.6 MPa (6 bar, 87 psi) 1.25 Nm
Permissible mass moment of inertia 0.005 kgm²
Product weight 275 g
Type of mounting With female thread
Pneumatic connection M5
Note on materials RoHS compliant
Material drive shaft Steel
nickel-plated
Material seals TPE-U(PU)
Material housing Anodised aluminium

Application Notes

Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.

Selection and Installation

Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.

Inquiry

For a quotation or replacement enquiry, provide model DSM-12-270-P-A-B, part number 547570, quantity, destination and clear photos of the original unit when available.

Datasheet Selection Note

Festo lists swivel angle as 0 deg … 270 deg for part number 547570. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.

Functional Check After Replacement

After fitting the replacement, follow the equipment commissioning procedure before returning the machine to normal operation. Where applicable, test under controlled conditions and observe response, movement, signals, leakage, and connection stability. Check the installation again after its initial run to identify any adjustment that may be needed.

Product Inquiry Support

We assist customers with industrial automation spare-part enquiries, including model confirmation, replacement questions, and initial photo comparisons. If you are unsure which version is installed, you may send the complete model code and clear photos of the nameplate or component. We will use the information provided to help review the enquiry and identify details that still need confirmation.

Additional information

Brand

FESTO

Model

DSM-12-270-P-A-B

Part Number

547570

Size

12

Cushioning angle

1.8 deg

Rotation angle adjustment range

0 deg … 270 deg

Swivel angle

0 deg … 270 deg

Permissible stop radius

≥15 mm

Cushioning

Elastic cushioning rings/plates at both ends

Mounting position

Any

Fine adjustment

-6 deg