FESTO EGSC-BS-KF-60-100-12P 4356469 Mini Slide
The Festo EGSC-BS-KF-60-100-12P (part number 4356469) is a mini slide. Its product datasheet lists working stroke as 100 mm and size as 60.
Description
FESTO EGSC-BS-KF-60-100-12P 4356469 Mini Slide
The Festo EGSC-BS-KF-60-100-12P (part number 4356469) is a mini slide. Its product datasheet lists working stroke as 100 mm and size as 60.
Key Features
- Working stroke: 100 mm
- Size: 60
- Stroke reserve: 0 mm
- Spindle pitch: 12 mm/U
Technical Data
| Brand | FESTO |
|---|---|
| Model | EGSC-BS-KF-60-100-12P |
| Part number | 4356469 |
| Working stroke | 100 mm |
| Size | 60 |
| Stroke reserve | 0 mm |
| Reversing backlash theoretical | 150 µm |
| Spindle diameter | 12 mm |
| Spindle pitch | 12 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |
| Design | With ball screw |
| Type of motor | Stepper motor Servo motor |
| Referencing | Positive fixed stop block Negative fixed stop block Reference switch |
| Spindle type | Ball screw |
| Position detection | Via proximity switch |
| Max. acceleration | 15 m/s² |
| Max. rotational speed | 3000 rpm |
| Max. speed | 0.6 m/s |
| Repetition accuracy | ±0.015 mm |
| Duty cycle | 100% |
| Corrosion resistance class CRC | 0 – No corrosion stress |
| Suitability for the production of Li-ion batteries | Suitable for battery production with reduced Cu/Zn/Ni values (F1a) |
| Cleanroom suitability, measured according to ISO 14644-14 | Class 9 according to ISO 14644-1 |
| Sound pressure level | 55 dB(A) |
| Degree of protection | IP40 |
| Ambient temperature | 0 °C … 50 °C |
| Impact energy in end positions | 4.4E-5 J |
| Note on the impact energy in the end positions | At maximum homing speed of 0.01 m/s |
| Dynamic basic load rating fixed bearing | 13321 N |
| Dynamic basic load rating linear guide | 13400 N |
| Dynamic basic load rating ball screw | 4600 N |
| Idle torque at vmax | 0.306 Nm |
| Idle torque at vmin | 0.04 Nm |
| Max. force Fy | 4937 N |
| Max. force Fz | 4937 N |
| Max. radial force at drive shaft | 230 N |
| Max. feed force Fx | 250 N |
| Product weight | 2505 g |
| Basic weight for 0 mm stroke | 1555 g |
| Additional weight per 10 mm stroke | 95 g |
| Type of mounting | With female thread With centring sleeve With accessories Via cylindrical dowel pin |
| Note on materials | RoHS compliant |
| Material guide slide | Bearing steel |
| Material guide rail | Bearing steel |
| Material housing | Anodised wrought aluminium alloy |
| Material yoke plate | Anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |
| Material slide | Anodised wrought aluminium alloy |
| Material ball screw nut | Bearing steel |
| Material spindle | Bearing steel |
Application Notes
Check the complete model code, installed connections and operating limits against the original equipment. Products in the same series may differ in size, stroke, actuation, pressure range or mounting details.
Selection and Installation
Compare the original nameplate and part number with the product-specific datasheet. Follow the equipment manufacturer instructions for installation and commissioning, and clarify uncertain options before ordering.
Inquiry
For a quotation or replacement enquiry, provide model EGSC-BS-KF-60-100-12P, part number 4356469, quantity, destination and clear photos of the original unit when available.
Datasheet Selection Note
Festo lists stroke reserve as 0 mm for part number 4356469. Confirm the full model code and the matching connection, operating range and mounting arrangement against the installed product before ordering.
Application Review
When considering this mini slide for an industrial application, review the operating conditions of the equipment rather than relying on the product name alone. Confirm the required connections, available space, duty pattern, and surrounding environment. The final selection should follow the complete product specification and the machine manufacturer's requirements.
International Delivery Options
We can discuss international delivery arrangements according to the order and destination. FedEx, UPS, DHL, or another suitable express service may be considered based on the shipment requirements. Please provide the delivery location and product details during the enquiry so that the available shipping arrangement can be confirmed before the order is processed.
Additional information
| Brand | FESTO |
|---|---|
| Model | EGSC-BS-KF-60-100-12P |
| Part Number | 4356469 |
| Working stroke | 100 mm |
| Size | 60 |
| Stroke reserve | 0 mm |
| Reversing backlash theoretical | 150 µm |
| Spindle diameter | 12 mm |
| Spindle pitch | 12 mm/U |
| Mounting position | Any |
| Guide | Recirculating ball bearing guide |







